Publications

ResearchGate | Google Scholar

See a selected list of publications below.

Journal papers

  1. W. Li and G. Palardy, “Investigation of welding repair methods for thermoplastic composite joints”, Composites Part B, 264, 2023, 10.1016/j.compositesb.2023.110924.
  2. H.O. Erkol, M. Bailey, G. Palardy and C. Barbalata, “Predicting composite laminates roughness: data-driven modeling approaches using force sensor data from robotic manipulators”, International Journal of Advanced Manufacturing Technology, 128, 2023, 10.1007/s00170-023-11909-w.
  3. M. Kirby, A. Naderi and G. Palardy, “Predictive thermal modeling and characterization of ultrasonic consolidation process for thermoplastic composites”, Journal of Manufacturing Science and Engineering, 145(3), 2023, 10.1115/1.4056147.
  4. P. Molaei, N. Pitts, G. Palardy, J. Su, M.K. Mahlin, J.H. Neilan and H.B. Gilbert*, “Cable Decoupling and Cable-Based Stiffening of Continuum Robots”, IEEE Access, 2022, 10.1109/ACCESS.2022.3210120.
  5. W. Li and G. Palardy, “Damage Monitoring Methods for Fiber-Reinforced Polymer Joints: A Review”, Composite Structures, 299, 2022, DOI:10.1016/j.compstruct.2022.116043.
  6. W. Li and G. Palardy, “Electro-mechanical response of ultrasonically welded thermoplastic composite interfaces under static and cyclic flexural loads using nanocomposites ”, ACS Applied Polymer Materials, 4(7), 2022, DOI: 10.1021/acsapm.2c00737.
  7. A. Naderi and G. Palardy, "Comparison of microstructure and tensile behavior of hydroxyapatite-coated PEEK  meshes and cellulose-based fabrics and mats", Journal of Industrial Textiles, 2022, DOI: 10.1177/15280837211070021 (published through Online First). 
  8. A. Naderi, B. Zhang, J.A. Belgodere, K. Sunder and G. Palardy, “Improved Biocompatible, Flexible Mesh Composites for Implant Applications via Hydroxyapatite Coating with Potential for 3-Dimensional Extracellular Matrix Network and Bone Regeneration”, ACS Applied Materials & Interfaces, 13(23), 2021, DOI: 10.1021/acsami.1c09034.
  9. H. Frederick,  W. Li and G. Palardy, “Disassembly study of ultrasonically welded thermoplastic composite joints via resistive heating”, Materials, 14(10), 2021, DOI: 10.3390/ma14102521 (Special Issue “Ultrasound for Material Characterization and Processing”).
  10. W. Li, H. Frederic and G. Palardy, “Multifunctional Films for Thermoplastic Composite Joints: Ultrasonic Welding and Damage Detection under Tension Loading”, Composites Part A, 41, 2021, DOI: 10.1016/j.compositesa.2020.106221.
  11. D. Hoskins and G. Palardy, "High-speed consolidation and repair of carbon fiber/epoxy laminates through ultrasonic vibrations: a feasibility study", Journal of Composite Materials, 54(20), 2020, DOI: 10.1177/0021998320903097.
  12. A. Naderi, A. Dolati, A. Afshar and G. Palardy, "A simple route to synthesize zirconia antistatic thin films on glass substrates and their application to polymer-based composites", Materials Chemistry & Physics, 244, 2020, DOI: 10.1016/j.matchemphys.2020.122696.
  13. B. Jongbloed, J. Teuwen, G. Palardy, I.F. Villegas, R. Benedictus, "Continuous Ultrasonic Welding of Thermoplastic Composites: Enhancing the Weld Uniformity by Changing the Energy Director", Journal of Composite Materials, 54(15), 2019, DOI: 10.1177/0021998319890405.
  14. G. Palardy, H. Shi, A. Levy, S. Le Corre, I.F. Villegas, "A study on amplitude transmission in ultrasonic welding of thermoplastic composites", Composites Part A, 113, pp. 339-349, 2018, DOI: 10.1016/j.compositesa.2018.07.033.
  15. T. Zhao, C. Broek, G. Palardy, I.F. Villegas, R. Benedictus, "Towards robust sequential ultrasonic spot welding of thermoplastic composites: Welding process control strategy for consistent weld quality", Composites Part A, 109, pp. 355-367, 2018, DOI: 10.1016/j.compositesa.2018.03.024.
  16. B. Müller, G. Palardy, S.T. De Freitas, J. Sinke, "Out-of-autoclave manufacturing of GLARE panels using resistance heating", Journal of Composite Materials, 2017, DOI: 10.1177/0021998317727592.
  17. T. Zhao, G. Palardy, I.F. Villegas, C. Rans, M. Martinez, R. Benedictus, "Mechanical behavior of thermoplastic composites spot-welded and mechanically fastened joints: a preliminary comparison", Composites Part B, 112, 2017, DOI: 10.1016/j.compositesb.2016.12.028.
  18. G. Palardy, I.F. Villegas, "On the effect of flat energy directors thickness on heat generation during ultrasonic welding of thermoplastic composites", Composite Interfaces, 2017, 24(2), pp. 203-14, DOI: 10.1080/09276440.2016.1199149.
  19. F. Senders, M. van Beurden, G. Palardy, I.F. Villegas, "Zero-flow: A novel approach to continuous ultrasonic welding of CF/PPS thermoplastic composite plates", Advanced Manufacturing: Polymer and Composites Science, 2016, 2(3-4), DOI: 10.1080/20550340.2016.1253968 (open access).
  20. I.F. Villegas, G. Palardy, "Ultrasonic welding of thermoplastic composite coupons for mechanical characterization of welded joints through single lap shear testing", Journal of Visualized Experiments, 2016, 108, DOI: 10.3791/53592.
  21. G. Palardy, D. Trudel-Boucher, P. Hubert, "Investigation of a post-processing method to tailor the mechanical properties of carbon nanotube/polyamide fibres", Journal of Applied Polymer Science, 2013, 130(6), pp. 4375-82, DOI: 10.1002/app.39713.
  22. G. Palardy, P. Hubert, E. Ruiz, M. Haider, L. Lessard, "Numerical simulations for class A surface finish in resin transfer moulding process", Composites Part B, 2012, 43(2), p. 819-24, DOI: 10.1016/j.compositesb.2011.06.002.
  23. G. Palardy, P. Hubert, M. Haider, L. Lessard, "Optimization of RTM processing parameters for Class A surface finish", Composites Part B, 2008, 39(7-8), p. 1280-6, DOI: 10.1016/j.compositesb.2007.12.003.

Conference presentations/proceedings

  1. L. Weger, L. Velazquez, C. Barbalata, D. Roy and G. Palardy, “Curing Behavior Simulator for Robotic 3D Printing of UV-Curable Thermoset Polymers” SPE ANTEC, Charlotte NC, June 14-16, 2022.
  2. W. Li and G. Palardy, “Mechanical and electrical properties of MWCNT/PP films and structural health monitoring of GF/PP joints using electrical resistance measurements”, SPE Automotive Composites Conference & Exhibition, Detroit MI, November 2-4, 2021 (invited talk as 2020 Dr. Jackie Rehkopf Scholar).
  3. L. Velazquez, G. Palardy and C. Barbalata, “Design and integration of end-effector extruder for 3D printing novel UV-curable shape memory polymers with a collaborative robotic system”, The Composites and Advanced Materials Expo (CAMX), Dallas TX, October 18-21, 2021.
  4. Y. Ding, J. Ye, C. Barbalata, J. Oubre, C. Lemoine, J. Agostinho and G. Palardy, “Next-generation perception system for automated defects detection in composite laminates via polarized computational imaging”, The Composites and Advanced Materials Expo (CAMX), Dallas TX, October 18-21, 2021.
  5. A. Naderi and G. Palardy, “Low-cost synthesis of hydroxyapatite on different bed materials: crystalline structure, morphology and process efficiency”, 11th World Biomaterials Congress (WBC), December 11-15, 2020, UK (virtual poster presentation).
  6. S. Williams and G. Palardy, “Ultrasonic consolidation of dry carbon fiber and polyphenylene sulfide film”, SAMPE 2020 Virtual Series, July 20, 2020.
  7. H. Frederick, W. Li, W. Sands, E. Tsai and G. Palardy, “Multifunctional films for fusion bonding and structural health monitoring of thermoplastic composite joints”, SAMPE 2020 Virtual Series, July 6, 2020.
  8. D. Hoskins and G. Palardy, "An investigation of high-speed consolidation of carbon fiber - epoxy composites through ultrasonic welding", The Composites and Advanced Materials Expo, CAMX, Anaheim, CA, September 23-26 2019.
  9. B. Jongbloed, J. Teuwen, G. Palardy, I.F. Villegas, R. Benedictus, "Improving weld uniformity in continuous ultrasonic welding of thermoplastic composites", 18th European Conference on Composite Materials, ECCM18, Athens, Greece, June 24-28, 2018.
  10. G. Palardy, H. Shi, A. Levy, S. Le Corre, I.F. Villegas, "Experimental investigation of amplitude transmission in ultrasonic welding of thermoplastic composites", SPE ANTEC, Orlando, Florida, United States, May 7-10, 2018.
  11. T. Zhao, G. Palardy, I.F. Villegas, C. Rans, R. Benedictus, "Towards high-quality multi-spot welded joints in thermoplastic composite structures", 21st International Conference on Composite Materials, ICCM21, Xi'an, China, August 20-25, 2017.
  12. G. Palardy, F. Senders, M. van Beurden, I.F. Villegas, "Continuous ultrasonic welding of thermoplastic composite plates", 3rd International Symposium on Automated Composites Manufacturing, Montreal, Quebec, Canada, April 20-21, 2017.
  13. G. Palardy, I.F. Villegas, "Smart ultrasonic welding of thermoplastic composites", American Society for Composites, Williamsburg, Virginia, United States, September 19-22, 2016 (nomination for Best Paper Award).
  14. G. Palardy, I.F. Villegas, "Ultrasonic welding of thermoplastic composites: investigating the flow of energy directing strips", Flow Processes in Composite Materials, FPCM13, Kyoto, Japan, July 6-9, 2016 (abstract only).
  15. T. Zhao, I.F. Villegas, C. Rans, G. Palardy, R. Benedictus, "Comparative analysis of out-of-plane and in-plane mechanical behavior of spot-welded and riveted joints in thermoplastic composites", 17th European Conference on Composite Materials, ECCM17, Munich, Germany, June 26-30, 2016.
  16. G. Palardy, I.F. Villegas, "Ultrasonic welding of thermoplastic composites with flat energy directors: influence of the thickness of the energy director on the welding process", 20th International Conference on Composite Materials, ICCM20, Copenhagen, Denmark, July 19-24, 2015.
  17. G. Palardy, M. Agricola, C. Dransfeld, I.F. Villegas, "Up-scaling of the ultrasonic welding process for joining thermoplastic composites", Society for the Advancement of Material and Process Engineering, SAMPE Baltimore, United States, May 19-21, 2015.
  18. P. Trudeau, C. Demaria, G. Palardy, H. Salek, M-A. Jette, P. Hubert, "Process induced deformation of aircraft structural components", 19thInternational Conference on Composite Materials, ICCM19, Montreal, Canada, July 28-August 2, 2013.
  19. G. Palardy, D. Trudel-Boucher, P. Hubert, "Development of a post-processing method to tailor the mechanical properties of carbon nanotube/nylon fibres", 15th European Conference on Composite Materials, ECCM15, Venice, Italy, June 24-28, 2012.
  20. G. Palardy, D. Trudel-Boucher, P. Hubert, "A post-processing method to improve the mechanical properties of carbon nanotube/thermoplastic fibres", 69th Annual Technical Conference of the Society of Plastics Engineers, ANTEC, Boston, Massachusetts, United States, May 1-5, 2011.
  21. G. Palardy, D. Trudel-Boucher, P. Hubert, "Development of a Processing and Properties Map of Carbon Nanotube-Reinforced Thermoplastic Fibres", American Society for Composites, ASC, Newark, Delaware, United States, September 15-17, 2009.
  22. G. Palardy, P. Hubert, "Effect of the Painting Process on the Surface Finish of RTM Composite Car Body Panels", 28th SAMPE Europe International Conference and Forums, Paris, France, April 2-4, 2007.