Patents and Publications

Patents

  1. G. Li. Thermosetting shape memory polymers with ability to perform repeated molecular scale healing. US 9,493,643 B2, November, 2016.
  2. G. Li and H. Meng. Self-healing composite of thermoset polymer and programmed super contraction fibers. US 9,428,647 B2, August, 2016.
  3. G. Li and G. Ji. Sandwich Panel with a Ductile Hybrid Core Comprising Tubular Reinforcement. US 9,850,660 B2, December 26, 2017, 2017.
  4. A.D. Taleghani, A. Shojaei, and G. Li. Shape memory polymer proppants, methods of making shape memory polymer proppants for application in hydraulic fracturing treatments. US10005953B2, June 26, 2018.
  5. G. Li and H. Meng. Healing of Thermosetting Polymer with Embedded Stimuli Responsive Fibers. US 10,239,788 B2, March 26, 2019.

Books

  1. G. Li. Self-Healing Composites: Shape Memory Polymer Based Structures. John Wiley & Sons, Inc., West Sussex, UK, ISBN-13: 978-1118452424, ISBN-10: 1118452429, (November, 2014) (392 pages).
  2. J.Q. Cheng, G. Li, and S.S. Pang. Smart Adhesively Bonded Composite Joints: Analysis and Design. Nova Science Publishers, Inc., (ISBN: 978-1607411284), (November, 2009) (103 pages).

Edited Book

  1. G. Li and H. Meng. Recent Advances in Smart Self-healing Polymers and Composites. ISBN: 978-1-78242-280-8, Elsevier, Cambridge, UK, (June, 2015) (426 pages).

Refereed Journal Papers

  1. X. Feng, J. Fan, A. Li, and G. Li. Multi-reusable thermoset with anomalous flame triggered shape memory effect. ACS Applied Materials & Interfaces, Vol. 11, No. 17, pp 16075–16086, (April, 2019).
  2. A. Li, A. Challapalli, and G. Li. 4D Printing of Recyclable Lightweight Architectures Using High Recovery Stress Shape Memory Polymer. Scientific Reports, Vol. 9, Article number 7621, (May, 2019) DOI: 10.1038/s41598-019-44110-9.
  3. C. Liu, H. Lu, G. Li, D. Hui, Y. Fu. A ‘cross-relaxation effects’ model for dynamic exchange of water in amorphous polymer with thermochemical shape memory effect. Journal of Physics D: Applied Physics, (Accepted June 7, 2019) DOI: 10.1088/1361-6463/ab2860.
  4. C. Yan and G. Li. Design Oriented Constitutive Modeling of Amorphous Shape Memory Polymers and Its Application to Multiple Length Scale Lattice Structures. Smart Materials and Structures (Accepted May 17, 2019), DOI: 10.1088/1361-665X/ab230c.
  5. A. Mansour, A.D. Taleghani, S. Salehi, G. Li, C. Ezeakacha. Smart lost circulation materials for productive zones. Journal of Petroleum Exploration and Production Technology, Vol. 9, No. 1, pp 281–296, (March 2019).
  6. P. Zhang, Z. Gao, Q. Zhang, A. Khattab, G. Li. Fracture Behavior Characterization of Shape Memory Polymer Composites Using Arcan Specimen. Polymer Composites, Vol. 49, No. 3, pp. 1198-1208, (March 2019).
  7. F. Tavangarian, A. Fahami, G. Li, M. Kazemi, A. Forghaniand. Structural characterization and strengthening mechanism of forsterite nanostructured scaffolds synthesized by multistep sintering method. Journal of Materials Science & Technology, Vol. 34, pp. 2263–2270, (December, 2018).
  8. L. Lu, J. Cao, and G. Li. Giant reversible elongation upon cooling and contraction upon heating for a crosslinked cis poly(1,4-butadiene) system at temperatures below zero Celsius. Scientific Reports, Vol. 8, Article number 14233, (September, 2018), DOI:10.1038/s41598-018-32436-9.
  9. J. Fan and G. Li. High Enthalpy Storage Thermoset Network with Giant Stress and Energy Output in Rubbery State. Nature Communications, Vol. 9, No. 1, paper 642, (February 13, 2018) DOI: 10.1038/s41467-018-03094-2.
  10. A. Li, J. Fan, and G. Li. Recyclable Thermoset Shape Memory Polymer with High Stress and Energy Output via Facile UV-Curing. Journal of Materials Chemistry A, Vol. 6, pp.11479–11487, (June, 2018).
  11. G. Tan, H. Li, H. Zhu, S. Lu, J. Fan, G. Li, X. Zhu. Concentration flow cells for efficient salinity gradient energy recovery based on chloride-ion intercalation/deintercalation with metal chloride electrodes. ACS Sustainable Chemistry and Engineering, Vol. 6, No. 11, pp. 15212-15218, (October, 2018).
  12. P. Zhang, D.J. Arceneaux, Z. Liu, P. Nikaeen, A. Khattab, G. Li. A crack healable syntactic foam reinforced by 3D printed healing-agent based honeycomb. Composites Part B: Engineering, Vol. 151, pp. 25-34, (October 2018).
  13. L. Santo, A.D. Taleghania, G. Li. Expandable Proppants to Moderate Production Drop in Hydraulically Fractured Wells. Journal of Natural Gas Science and Engineering, Vol. 55, pp. 182-190, (July 2018), DOI: 10.1016/j.jngse.2018.04.026.
  14. Y. Gao, D. Geng, X. Huang, R. Cao, and G. Li. Prediction of Remaining Service Life of Asphalt Pavement Using Dissipated Energy Method. ASCE Journal of Transportation Engineering Part B – Pavement, Vol. 144, No. 2, paper 04018011, (February, 2018).
  15. F. Tavangarian, D. Hui, and G. Li. Crack-Healing in Ceramics. Composites Part B: Engineering, Vol. 144, 56-87, (July 2018).
  16. L. Lu, J. Pan, and G. Li. Recyclable High Performance Epoxy Based on Transesterification Reaction. Journal of Materials Chemistry A, Vol. 5, pp. 21505 – 21513, (October 2017).
  17. L. Lu, J. Cao, and G. Li. A polycaprolactone based syntactic foam with bidirectional reversible actuation. Journal of Applied Polymer Science, Vol. 134, No. 34, paper number 45225, (September, 2017).
  18. A.D. Taleghani, G. Li, M. Moayeri*. Smart Expandable Cement Additive to Achieve Better Wellbore Integrity. ASME Journal of Energy Resource Technology, Vol. 139, No. 6, paper number 062903, (November, 2017).
  19. Y. Gao, D. Geng, X. Huang, and G. Li. Degradation Evaluation Index of Asphalt Pavement Based on Mechanical Performance of Asphalt Mixture. Construction and Building Materials, Vol. 140, pp. 75–81, (June 2017).
  20. J. Fan and G. Li. High performance and tunable artificial muscle based on two-way shape memory polymer. RSC Advances, Vol. 7, No. 2, pp. 1127–1136, (February 2017).
  21. P. Zhang and G. Li. Fishing line artificial muscle reinforced composite for impact mitigation and on-demand damage healing. Journal of Composite Materials, Vol. 50, No. 30, pp. 4235–4249, (December 2016).
  22. L. Lu, J. Fan, and G. Li. Intrinsic Healable and Recyclable Thermoset Epoxy Based on Shape Memory Effect and Transesterification Reaction. Polymer, Vol. 105, pp. 10-18, (November 2016).
  23. Q. Yang, J. Fan, and G. Li. Artificial muscles made of chiral two-way shape memory polymer fibers. Applied Physics Letters, Vol. 109, No. 18, paper number 183701, (October, 2016).
  24. P. Zhang, B. Ogunmekan, S. Ibekwe, D. Jerro, S.S. Pang, G. Li. Healing of Shape Memory Polyurethane Fiber Reinforced Syntactic Foam Subjected to Tensile Stress. Journal of Intelligent Material Systems and Structures, Vol. 27, No. 13, pp. 1792-1801, (August, 2016).
  25. Q. Yang and G. Li. A Top-down Multi-scale Modeling for Actuation Response of Polymeric Artificial Muscles. Journal of the Mechanics and Physics of Solids, Vol. 92, pp. 237–259, (July, 2016).
  26. J. Champagne, S.-S. Pang, G Li. Effects of Partial Confinement and Local Heating on Healing Efficiencies of Self-healing Particulate Composites. Composites Part B: Engineering, Vol. 97, pp. 344-352, (July 2016).
  27. P. Zhang, U. Ayaugbokor, S. Ibekwe, D. Jerro, S.S. Pang, P. Mensah, G. Li. Healing of Polymeric Artificial Muscle Reinforced Ionomer Composite by Resistive Heating. Journal of Applied Polymer Science, Vol. 133, No. 28, paper number 43660, (July, 2016).
  28. G. Li and A. Wang. Cold, Warm, and Hot Programming of Shape Memory Polymers. Journal of Polymer Science Part B: Polymer Physics, Vol. 54, pp. 1319-1339, (July, 2016).
  29. L. Lu and G. Li. One-way multi-shape memory effect and tunable two-way shape memory effect of ionomer poly(ethylene-co-methacrylic acid). ACS Applied Materials & Interface, Vol. 8, No. 23, pp 14812–14823, (June, 2016).
  30. P. Zhang and G. Li. Recent Advances in Healing-on-Demand Polymers and Polymer Composites. Progress in Polymer Science, Vol. 57, pp. 32-63, (June 2016).
  31. Q. Yang and G. Li. Temperature and rate dependent thermomechanical modeling of shape memory polymers with physics based phase evolution law. International Journal of Plasticity, Vol. 80, pp. 168-186, (May 2016).
  32. S. Sharafi and G. Li. Multiscale Modeling of Vibration Damping Response of Shape Memory Polymer Fibers. Composites Part B-Engineering, Vol. 91, pp. 306-314, (April 2016).
  33. A. Shojaei, G. Li, P.J. Tan, J. Fish. Dynamic Delamination in Laminated Fiber Reinforced Composites: A Continuum Damage Mechanics Approach. International Journal of Solids and Structures, Vol. 71, pp. 262-276, (October, 2015).
  34. F. Tarvangarian and G. Li. Crack healing and strength recovery in SiC/Spinel nanocomposite. Ceramic International, Vol. 41, No. 7, pp. 8702–8709, (August, 2015).
  35. F. Tavangarian and G. Li. Crack-healing in spinel (MgAl2O4) ceramic. Materials Science and Engineering A, Vol. 641, pp. 201-209, (August, 2015).
  36. A. Wang and G. Li. Stress Memory of A Thermoset Shape Memory Polymer. Journal of Applied Polymer Science, Vol. 132, No. 24, paper number 42112, (June 2015).
  37. G. Li, G. Ji, H. Meng. Shape memory polymer based sealant for compression sealed joint. ASCE Journal of Materials in Civil Engineering, Vol. 27, No. 6, paper number 04014196, (June 2015).
  38. F. Wu, G. Li, S.T. Smith, and R.Q. Xu. Special issue on applications of engineering composites: Materials, structures, and interfaces. Advance in Mechanical Engineering, Vol. 7, No. 7, (July 2015).
  39. S. Sharafi and G. Li. A Mutliscale Approach for Modeling Actuation Response of Polymeric Artificial Muscle. Soft Matter, Vol. 11, No. 19, pp. 3833 – 3843, (May 2015).
  40. P. Zhang and G. Li. Healing-on-demand Composites Based on Polymer Artificial Muscle. Polymer, Vol. 64, pp. 29-38, (May, 2015).
  41. F. Tavangarian and G. Li. Bio-inspired self-crack-healing of SiC/Spinel nanocomposite. Ceramic International, Vol. 41B, No. 2, pp. 2828-2835, (March, 2015).
  42. A. Shojaei, S. Sharafi, and G. Li. A Multiscale Theory of Self-Crack-Healing with Solid Healing Agent Assisted by Shape Memory Effect. Mechanics of Materials, Vol. 81, 25-40, (February, 2015).
  43. G. Li and F. Tarvangarian. Sintering behavior, microstructure and mechanical properties of vacuum sintered SiC/spinel nanocomposites. Journal of Alloys and Compounds, Vol. 615, pp. 204-210, (December, 2014).
  44. Q. Yang and G. Li. Investigation into stress recovery behavior of shape memory polyurethane fiber. Journal of Polymer Science-Part B: Polymer Physics, Vol. 52, No. 21, pp. 1429–1440 (November, 2014).
  45. F. Tavangarian, G. Li. Mechanical activation assisted synthesis of nanostructure MgAl2O4 from gibbsite and lansfordite. Powder Technology, Vol. 267, pp. 333–338, (November, 2014).
  46. A. Shojaei, G. Li, J. Fish, and P.J. Tan. Multi-scale Constitutive Modeling of Ceramic Matrix Composites by Continuum Damage Mechanics. International Journal of Solids and Structures, Vol. 51, No. 23–24, pp. 4068-4081, (November, 2014).
  47. Q. Yang and G. Li. A Spider Silk like Shape Memory Polymer Fiber for Vibration Damping. Smart Materials and Structures, Vol. 23, No. 10, paper number 105032 (14 pages) (October, 2014).
  48. A. Shojaei and G. Li. Thermomechanical Constitutive Modeling of Shape Memory Polymer Including Continuum Functional and Mechanical Damage Effects. Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences, Vol. 470, No. 2170, paper number 20140199 (25 pages), (October, 2014).
  49. A. Shojaei, A.D. Taleghani, G. Li. A Continuum Damage Failure Model for Hydraulic Fracturing of Porous Rocks. International Journal of Plasticity, Vol. 59, pp. 199-212, (August 2014).
  50. Warner IM, Crawford M, Wilson Z, Pang SS, Wright A, Li G, Thomas G. Mentoring, research, and diversity: Transforming undergraduate STEM education. Abstracts of Papers of the American Chemical Society, 248: 4-CMA, (2014).
  51. G. Ji, G. Li, and S.S. Pang. Novel Sandwich Panel with Metallic Millitube Grid Stiffened Polymer Core for Impact Mitigation. Engineering Structures, Vol. 71, pp. 178-186, (July, 2014).
  52. F. Tavangarian and G. Li. Synthesis, characterization and formation mechanism of SiC/spinel nanocomposite. Journal of Alloys and Compounds, Vol. 598, pp. 106-112, (June 2014).
  53. G. Ji and G. Li. Impact Tolerant and Healable Aluminum Millitube Reinforced Shape Memory Polymer Composite Sandwich Core. Materials & Design, Vol. 51, pp. 79-87, (October 2013).
  54. G. Ji, Z. Ouyang and G. Li. Debonding and Impact Tolerant Sandwich Panel with Hybrid Foam Core. Composite Structures, Vol. 103, pp. 143–150, (September 2013).
  55. H. Meng, H. Mohamadian, M. Stubblefield, D. Jerro, S. Ibekwe, S.S. Pang, and G. Li. Various shape memory effects of stimuli-responsive shape memory polymers. Smart Materials and Structures, Vol. 22, No. 9, paper number 093001 (23 pages), (September, 2013).
  56. G. Li and P. Zhang. A Self-healing Particulate Composite Reinforced with Strain Hardened Short Shape Memory Polymer Fibers. Polymer, Vol. 54, No. 18, pp. 5075-5086 (August, 2013).
  57. A. Wang, G. Li and H. Meng. Strain rate effect on the thermomechanical behavior of a thermoset shape memory polymer. Smart Materials and Structures, Vol. 22, No. 8, paper number 085033, (August, 2013).
  58. H. Meng and G. Li. Reversible Switching Transitions of Stimuli-Responsive Shape Changing Polymers. Journal of Materials Chemistry A, Vol. 1, No. 27, pp. 7838-7865, (July 2013).
  59. H. Meng and G. Li. A Review of Stimuli-responsive Shape Memory Polymer Composites. Polymer, Vol. 54, No. 9, pp. 2199-2221 (April, 2013).
  60. P. Zhang and G. Li. Structural Relaxation Behavior of Strain Hardened Shape Memory Polymer Fibers for Self-Healing Applications. Journal of Polymer Science Part B: Polymer Physics, Vol. 51, No. 12, pp. 966–977, (June 2013).
  61. G. Ji, G. Li, and W. Alaywan. A New Fire Resistant FRP for Externally Bonded Concrete Repair. Construction and Building Materials, Vol. 42, pp. 87-96, (May, 2013).
  62. G. Ji, Z. Ouyang and G. Li. Effects of Bondline Thickness on Mode-I Nonlinear Interfacial Fracture of Laminated Composites: An Experimental Study. Composites Part B: Engineering, Vol. 47, pp. 1-7, (April, 2013).
  63. J.Q. Cheng, S.S. Pang, G. Li, and Z.G. Zhou. Optimization of Smart Adhesively Bonded Single-Strap Composite Joint. Journal of Adhesion Science and Technology, Vol. 27, No. 8, pp. 879-895, (April 2013).
  64. A. Shojaei and G. Li. Viscoplasticity Analysis of Semicrystalline Polymers: A Multiscale Approach within Micromechanics Framework. International Journal of Plasticity, Vol. 42, pp. 31-49, (March 2013).
  65. G. Li, A. King, T. Xu, and X. Huang. Behavior of thermoset shape memory polymer based syntactic foam sealant trained by hybrid two-stage programming. ASCE Journal of Materials in Civil Engineering, Vol. 25, No. 3, pp. 393-402, (March, 2013).
  66. G. Li, O. Ajisafe, H. Meng. Effect of Strain Hardening of Shape Memory Polymer Fibers on Healing Efficiency of Thermosetting Polymer Composites. Polymer, Vol. 54, No. 2, pp. 920-928, (January, 2013).
  67. A. Shojaei, G. Li, G.Z. Voyiadjis. Cyclic Viscoplastic-Viscodamage Analysis of Shape Memory Polymer Fibers with Application to Self-Healing Smart Materials. ASME Journal of Applied Mechanics, Vol. 80, No. 1, paper No. 011014 (15 pages), (January, 2013).
  68. G. Li, H. Meng, and J. Hu. Healable Thermoset Polymer Composite Embedded with Stimuli-responsive Fibers. Journal of the Royal Society Interface, Vol. 9, No. 77, pp. 3279-3287, (December, 2012).
  69. G. Li and A. Shojaei. A Viscoplastic Theory of Shape Memory Polymer Fibers with Application to Self-Healing Materials. Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences, Vol. 468, No. 2144, pp. 2319-2346, (August, 2012).
  70. G. Li, G. Ji, and Z. Ouyang. Adhesively Bonded Healable Composite Joint. International Journal of Adhesion and Adhesives, Vol. 35, pp. 59-67, (June, 2012).
  71. G. Ji, Z. Ouyang and G. Li. Local Interface Shear Fracture of Bonded Steel Joints with Various Bondline Thicknesses. Experimental Mechanics, Vol. 52, No. 5, pp. 481-491, (May, 2012).
  72. J. Hu, H. Meng, G. Li, and S. Ibekwe. An Overview of Stimuli-responsive Polymers for Smart Textile Applications. Smart Materials and Structures, Vol. 21, No. 5, paper number 053001 (23 pages), (May, 2012).
  73. G. Ji, Z. Ouyang, and G. Li. On the Interfacial Constitutive Laws of Mixed Mode Fracture with Various Adhesive Thicknesses. Mechanics of Materials, Vol. 47, pp. 24-32, (April, 2012).
  74. G.Z. Voyiadjis, A. Shojaei, G. Li, and P.I. Kattan. Continuum Damage-Healing Mechanics with Introduction to New Healing Variables. International Journal of Damage Mechanics, Vol. 21, No. 3, pp. 391-414, (April, 2012).
  75. J. Nji and G. Li. Damage Healing Ability of A Shape Memory Polymer Based Particulate Composite with Small Thermoplastic Contents. Smart Materials and Structures, Vol. 21, No. 2, paper number 025011 (10 pages), (February, 2012).
  76. G.Z. Voyiadjis, A. Shojaei, G. Li, P.I. Kattan. A Theory of Anisotropic Healing and Damage Mechanics of Materials. Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences, Vol. 468, No. 2137, pp. 163-183, (January, 2012).
  77. G.Z. Voyiadjis, A. Shojaei, G. Li. A Generalized Coupled Viscoplastic-Viscodamage- Viscohealing Theory for Glassy Polymers. International Journal of Plasticity, Vol. 28, No. 1, pp. 21-45, (January, 2012).
  78. G. Li and T. Xu. Thermomechanical characterization of shape memory polymer based self-healing syntactic foam sealant for expansion joint. ASCE Journal of Transportation Engineering, Vol. 137, No. 11, pp. 805-814, (November, 2011).
  79. W. Xu and G. Li. Thermoviscoplastic Modeling and Testing of Shape Memory Polymer Based Self-healing Syntactic Foam Programmed at Glassy Temperature. ASME Journal of Applied Mechanics, Vol. 78, No. 6, paper number 061017 (14 pages), (November, 2011).
  80. T. Xu, G. Li, and S.S. Pang. Effects of ultraviolet radiation on morphology and thermo-mechanical properties of shape memory polymer based syntactic foam. Composites Part A: Applied Science and Manufacturing, Vol. 42, No. 10, pp. 1525-1533, (October, 2011).
  81. T. Xu and G. Li. Cyclic stress–strain behavior of shape memory polymer based syntactic foam programmed by 2-D stress condition. Polymer, 52(20): pp. 4571-4580, (September, 2011).
  82. T. Xu, G. Li. Durability of shape memory polymer based syntactic foam under accelerated hydrolytic ageing. Materials Science and Engineering A, Vol. 528, No. 24, pp. 7444-7450, (September, 2011).
  83. T. Xu and G. Li. A Shape Memory Polymer Based Syntactic Foam with Negative Poisson’s Ratio. Materials Science and Engineering A, Vol. 528, No. 22-23, pp. 6804-6811, (August, 2011).
  84. G.Z. Voyiadjis, A. Shojaei, and G. Li. A Thermodynamic Consistent Damage and Healing Model for Self Healing Materials. International Journal of Plasticity, Vol. 27, No. 7, pp. 1025-1044, (July, 2011).
  85. G. Li and W. Xu. Thermomechanical Behavior of Thermoset Shape Memory Polymer Programmed by Cold-Compression: Testing and Constitutive Modeling. Journal of the Mechanics and Physics of Solids, Vol. 59, No. 6, pp. 1231–1250, (June, 2011).
  86. Z. Ouyang, G. Ji, and G. Li. On Approximately Realizing and Characterizing Pure Mode-I Interface Fracture between Bonded Dissimilar Materials. ASME Journal of Applied Mechanics, Vol. 78, No. 3, (paper No. 031020) pp. 1-11, (May, 2011).
  87. G. Ji, Z. Ouyang and G. Li. Effects of Bondline Thickness on Mode-II Interfacial Laws of Bonded Laminated Composite Plate. International Journal of Fracture, Vol. 168, No. 2, pp. 197-207, (April, 2011).
  88. G. Li, S.S. Pang, and S.I. Ibekwe. FRP Tube Encased Rubberized Concrete Cylinders. Materials and Structure, Vol. 44, No. 1, pp. 233-243, (January, 2011).
  89. J. Nji and G. Li. A Biomimic Shape Memory Polymer Based Self-healing Particulate Composite. Polymer, Vol. 51, No. 25, pp. 6021-6029, (November, 2010).
  90. G. Li and N. Uppu. Shape Memory Polymer Based Self-Healing Syntactic Foam: 3-D Confined Thermomechanical Characterization. Composites Science and Technology, Vol. 70, No. 9, pp. 1419-1427, (September, 2010).
  91. G. Ji, Z. Ouyang, G. Li, S.I. Ibekwe, and S.S. Pang. Effects of Adhesive Thickness on Global & Local Mode-I Interfacial Fracture of Bonded Joints. International Journal of Solids and Structures, Vol. 47, No. 18-19, pp. 2445-2458, (September, 2010).
  92. M. John and G. Li. Self-Healing of Sandwich Structures with Grid Stiffened Shape Memory Polymer Syntactic Foam Core. Smart Materials and Structures, Vol. 19, No. 7, pp. 075013: 1-12, (July, 2010).
  93. W. Xu and G. Li. Finite Difference Three-Dimensional Solution of Stresses in Adhesively Bonded Composite Tubular Joint Subjected to Torsion. International Journal of Adhesion and Adhesives, Vol. 30, No. 4, pp. 191-199, (June, 2010).
  94. W. Xu and G. Li. Constitutive Modeling of Shape Memory Polymer Based Self-healing Syntactic Foam. International Journal of Solids and Structures, Vol. 47, No. 9, pp.1306-1316, (May, 2010).
  95. J. Nji and G. Li. A Self-Healing 3D Woven Fabric Reinforced Shape Memory Polymer Composite for Impact Mitigation. Smart Materials and Structures, Vol. 19, No. 3, pp. 035007: 1-9, (March, 2010).
  96. Z. Ouyang, G. Li, S.I. Ibekwe, M.A. Stubblefield, and S.S. Pang. Crack Initiation Process of DCB Specimens Based on First Order Shear Deformation Theory. Journal of Reinforced Plastics and Composites, Vol. 29, No. 5, pp. 651-663, (March, 2010).
  97. G. Li and D. Nettles. Thermomechanical Characterization of a Shape Memory Polymer Based Self-Repairing Syntactic Foam. Polymer, Vol. 51, No. 3, pp. 755-762, (February, 2010).
  98. G. Li and V.S. Chakka. Isogrid Stiffened Syntactic Foam Cored Sandwich Structure under Low Velocity Impact. Composites Part A: Applied Science and Manufacturing, Vol. 41, No. 1, pp. 177-184, (January, 2010).
  99. G. Ji, G. Li, S.-S. Pang, and W. Alaywan. Strength Enhancement of Advanced Grid Stiffened FRP Tube Confined Concrete Cylinders under Fire. Journal of Composite Materials, Vol. 43, No. 22, pp. 2555-2569, (October, 2009).
  100. G. Ji, Z. Ouyang, and G. Li. Experimental Investigation into the Interfacial Shear Strength of AGS FRP Tube Confined Concrete Pile. Engineering Structures, Vol. 31, No. 10, pp. 2309-2316, (October, 2009).
  101. Z. Ouyang and G. Li. Local Damage Evolution of DCB Specimens during Crack Initiation Process: A Natural Boundary Condition Based Method. ASME Journal of Applied Mechanics, Vol. 76, pp. 051003-1-051003-8, (September 2009).
  102. B. LaMattina, G. Li, and D. Hui. Blast/impact on engineered (nano)composite materials. Composites Part B: Engineering, Vol. 40, No. 6, pp. 413-415, (September, 2009).
  103. P.W. Zhang, Z.G. Zhou, and G. Li. Interaction of four parallel non-symmetric permeable mode-III cracks with different lengths in a functionally graded piezoelectric material plane. ZAMM – Journal of Applied Mathematics and Mechanics, Vol. 89, No. 9, pp. 767-788, (September, 2009).
  104. Z-G Zhou, P-W Zhang, and Li. Interactions of multiple parallel symmetric permeable mode-III cracks in a piezoelectric material plane. European Journal of Mechanics – A/Solids, Vol. 28, No. 4, pp. 728-737, (July-August, 2009).
  105. K. Singh and G. Li. Buckling of Functionally Graded and Elastically Restrained Non-uniform Columns. Composites Part B: Engineering, Vol. 40, No. 5, pp. 393-403, (July 2009).
  106. Z. Ouyang and G. Li. Nonlinear Interface Shear Fracture of End Notched Flexure Specimens. International Journal of Solids and Structures, Vol. 46, No.13, pp. 2659-2668, (June, 2009).
  107. Z. Ouyang and G. Li. Cohesive Zone Model Based Analytical Solutions for Adhesively Bonded Pipe Joints under Torsional Loading. International Journal of Solids and Structures, Vol. 46, No. 5, pp. 1205-1217, (March, 2009).
  108. Z. Ouyang and G. Li. Interfacial Debonding of Pipe Joints under Torsion Loads: A Model for Arbitrary Nonlinear Cohesive Laws. International Journal of Fracture, Vol. 155, No. 1, pp. 19-31, (January, 2009).
  109. G. Li and M. John. A Self-Healing Smart Syntactic Foam under Multiple Impacts. Composites Science and Technology, Vol. 68, No. (15-16), pp. 3337-3343, (December, 2008).
  110. G. Ji and G. Li. Effects of Nanoclay Morphology on the Mechanical, Thermal, and Fire-Retardant Properties of Vinyl Ester Based Nanocomposite. Materials Science and Engineering A, Vol. 498, No.1-2, pp. 327-334, (December, 2008).
  111. G. Ji, G. Li, X. Li, S.S. Pang, and R. Jones. Experimental Study of FRP Tube Encased Concrete Cylinders Exposed to Fire. Composite Structures, Vol. 85, No. 2,  pp. 149-154, (September, 2008).
  112. J. Nji and G. Li. A CaO Enhanced Rubberized Syntactic Foam. Composites Part A: Applied Science and Manufacturing, Vol. 39, No. 9, pp.1404-1411, (September, 2008).
  113. P.S. Sawhney, B. Condon, K.V. Singh, S.S. Pang, G. Li, and D. Hui. Modern Applications of Nanotechnology in Textiles. Textile Research Journal, Vol. 78, No. 8, pp. 731-739, (August, 2008).
  114. G. Li and V.D. Muthyala. Impact Characterization of Sandwich Structures with an Integrated Orthogrid Stiffened Syntactic Foam Core. Composites Science and Technology, Vol. 68, No. 9, pp. 2078-2084, (July, 2008).
  115. G. Li and R.C. Velamarthy. Fabricating, Testing, and Modeling of Advanced Grid Stiffened Fiber Reinforced Polymer Tube Encased Concrete Cylinders. Journal of Composite Materials, Vol. 42, No. 11, pp. 1103-1124 (June, 2008).
  116. G. Li and V.D. Muthyala. A Cement Based Syntactic Foam. Materials Science and Engineering A, Vol. 478, No.1-2, pp. 77-86, (April, 2008).
  117. Z.G. Zhou, P.W. Zhang, and G. Li. Basic solution of four parallel non-symmetric permeable Mode-III cracks in a piezoelectric/piezomagnetic composite plane. Philosophical Magazine, Vol. 88, No. 8, pp. 1153 – 1186, (March, 2008).
  118. J.Q. Cheng and G. Li. Stress Analysis of A Smart Composite Pipe Joint Integrated with Piezoelectric Composite Layers under Torsion Loading. International Journal of Solids and Structures, Vol. 45, No. 5, pp.1153-1178, (March, 2008).
  119. G. Li and M. John. A Crumb Rubber Modified Syntactic Foam. Materials Science and Engineering A, Vol. 474, No. 1-2, pp. 390-399, (February, 2008).
  120. G. Li and J.Q. Cheng. A Generalized Analytical Modeling of Grid Stiffened Composite Structures. Journal of Composite Materials, Vol. 41, No. 24, pp. 2939-2969 (December, 2007).
  121. J. Peck, S.S. Pang, G. Li, R. Jones, and B. Smith. Effect of UV-Cured FRP Joint Thickness on Coupled Composite Pipes. Composite Structures, Vol. 80, No. 2, pp. 290-297, (September, 2007).
  122. G. Li and D. Maricherla. Advanced Grid Stiffened FRP Tube Encased Concrete Cylinders. Journal of Composite Materials, Vol. 41, No. 15, pp. 1803-1824, (August, 2007).
  123. G. Li and J. Nji. Development of Rubberized Syntactic Foam. Composites Part A: Applied Science and Manufacturing, Vol. 38, No. 6, pp. 1483-1492, (June, 2007) (also presented at the 17th US Army Symposium on Solid Mechanics).
  124. S.I. Ibekwe, P. F. Mensah, G. Li, S. S. Pang, and M. A. Stubblefield. Impact and Post Impact Response of Laminated Beams at Low Temperatures. Composite Structures, Vol. 79, No. 1, pp. 12-17, (June, 2007).
  125. J.Q. Cheng, X. Wu, G. Li, F. Taheri, and S.-S. Pang. Design and Analysis of a Smart Adhesive Single-strap Joint System Integrated with the Piezoelectrics Reinforced Composite Layers. Composites Science and Technology, Vol. 67, No. 6, pp. 1264-1274, (May, 2007).
  126. J.Q. Cheng, X. Wu, G. Li, S.S. Pang and F. Taheri. Analysis of An Adhesively Bonded Single-Strap Joint Integrated with Shape memory Alloy (SMA) Reinforced Layers. International Journal of Solids and Structures, Vol. 44, No. 10, pp. 3557-3574, (May, 2007).
  127. G. Li. Experimental Study of Hybrid Composite Cylinders. Composite Structures, Vol. 78, No. 2, pp. 170-181, (April, 2007).
  128. B. Huang, X. Shu, and Li. Analytical Modeling of Three-Layered HMA Mixtures. International Journal of Geomechanics, (Special Issue on Constitutive Modeling of Paving Materials), Vol. 7, No. 2, pp. 140-148, (March/April, 2007).
  129. G. Li, M. John, and D. Maricherla*. Experimental Study of Hybrid Composite Beams. Construction and Building Materials, Vol. 21, No. 3, pp. 601-608, (March, 2007).
  130. J.Q. Cheng, X. Wu, G. Li, S.S. Pang and F. Taheri. Design and Analysis of A Smart Composite Pipe Joint System Integrated with Piezoelectric Layers under Bending. International Journal of Solids and Structures, Vol.44, No. 1, pp. 298-319, (January 2007).
  131. B. Huang, G. Li, and X. Shu. Investigation into Three-Layered Hot-Mix Asphalt Composite. Composites Part B: Engineering, Vol. 37, No. 7-8, pp.679-690, (October-December, 2006).
  132. J.Q. Cheng, X. Wu, G. Li, F. Taheri, and S.S. Pang. Development of a smart composite pipe joint integrated with piezoelectric layers under tensile loading. International Journal of Solids and Structures, Vol.43, No. 17, pp. 5370-5385, (August, 2006).
  133. G. Li, D. Maricherla, K. Singh, S. S. Pang, and M. John*. Effect of Fiber Orientation on the Structural Behavior of FRP Wrapped Concrete Cylinders. Composite Structures, Vol. 74, No. 4, pp. 475-483, (August, 2006).
  134. K.V. Singh, G. Li, and S.S. Pang. Free Vibration and Physical Parameter Identification of Non-uniform Composite Beams. Composite Structures, Vol. 74, No. 1, pp. 37-50, (July, 2006).
  135. G. Li. Experimental Study of FRP Confined Concrete Cylinders. Engineering Structures, Vol. 28, No. 7, pp. 1001-1008, (June, 2006).
  136. G. Li and A. Ghebreyesus. Fast Repair of Damaged RC Beams Using UV Curing FRP Composites. Composite Structures, Vol. 72, pp. 105-110, (January, 2006).
  137. B. Huang, G. Li, D. Vukosavljevic, X. Shu, and B. K. Egan. Laboratory Investigation of Mixing Hot-Mix Asphalt with Recycled Asphalt Pavement. Journal of the Transportation Research Record, No. 1929, pp. 37-45, (December, 2005).
  138. B. Huang, X. Shu, and G. Li. Laboratory Investigation of Portland Cement Concrete Containing Recycled Asphalt Pavements. Cement and Concrete Research, Vol. 35, No. 10, pp.2008 – 2013, (October, 2005).
  139. G. Li, S. Torres, W. Alaywan, and C. Abadie. Experimental Study of FRP Tube-Encased Concrete Columns. Journal of Composite Materials, Vol. 39, No. 13, pp. 1131-1145, (July, 2005).
  140. X. Li, G. Li, S.S. Pang, M.A. Stubblefield. Traffic Capacity under Air Quality Constraint. Advances in Transportation Studies: an international Journal Section B 6, pp.73-84, (July, 2005).
  141. G. Li, M. A. Stubbelfield, G. Garrick, J. Eggers, C. Abadie, and B. Huang. Development of Waste Tire Modified Concrete. Cement and Concrete Research, Vol. 34, No. 12, pp. 2283-2289, (December, 2004).
  142. X. Li, G. Li, S.S. Pang, X.G. Yang, and J.L. Tian. Signal Timing of Intersections Using Integrated Optimization of Traffic Quality, Emissions and Fuel Consumption: A Note. Transportation Research, Part D: Transport and Environment, Vol. 9, No. 5, pp. 401-407, (September, 2004).
  143. G. Li, G. Garrick, J. Eggers, C. Abadie, M.A. Stubblefield, and S.S. Pang. Waste Tire Fiber Modified Concrete. Composites Part B: Engineering, Vol. 35, No. 4, pp. 305-312, (July, 2004).
  144. S.S. Pang, G. Li, H. D. Jerro, J.A. Peck, and M.A. Stubblefield. Fast Joining of Composite Pipes Using UV Curing FRP Composites. Polymer Composites, Vol. 25, No. 3, pp. 298-306, (June, 2004).
  145. J.A. Peck, G. Li, S. S. Pang, and M. A. Stubblefield. Light Intensity Effect on UV Cured FRP Coupled Composite Pipe Joints. Composite Structures, 64 (3-4), pp. 539-549, (June, 2004).
  146. B. Huang, G. Li, S.S. Pang, and J. Eggers. Investigation into Waste Tire Rubber Filled Concrete. ASCE Journal of Materials in Civil Engineering, Vol. 16, No. 3, pp. 187-194, (May/June, 2004), (Also presented at 9th International Conference on Composite Engineering (ICCE/9), San Diego, July 1-7, 2002).
  147. G. Li, D. Davis, C. Stewart, J. Peck, and S.S. Pang. Joining Composite Pipes Using Hybrid Prepreg Welding and Adhesive Bonding. Polymer Composites, Vol. 24, No. 6, pp. 697-705, (December, 2003).
  148. B. Huang, G. Li, and L. N. Mohammad. Analytical Modeling and Experimental Study of Tensile Strength of Asphalt Concrete Composite at Low Temperatures. Composites Part B: Engineering, Vol. 34, No.8, pp. 705-714, (December, 2003).
  149. G. Li, S. Kidane, S.S. Pang, J.E. Helms, and M.A. Stubblefield. Investigation into FRP Repaired RC Columns. Composite Structures, Vol. 62, No. 1, pp. 83-89, (October, 2003), (also presented and published in 61th Annual Technical Conference (NTEC/03), SPE, Nashville, Tennessee, USA, May 4-8, 2003.)
  150. G. Li, S. Hedlund, S.S Pang, W. Alaywan, J. Eggers, and C. Abadie. Repair of Damaged RC Columns Using Fast Curing FRP Composites. Composites Part B: Engineering, Vol. 34, No. 3, pp.261-271, (April, 2003).
  151. G. Li, N. Pourmohamadian, A. Cygan, J. Peck, J. E. Helms, and S.S. Pang. Fast Repair of Laminated Beams Using UV Curing Composites. Composite Structures, Vol. 60, No. 1, pp. 73-81, (April, 2003), (also presented at 9th International Conference on Composite Engineering (ICCE/9), San Diego, July 1-7, 2002).
  152. G. Li, J.E. Helms, and S.S. Pang. Development of High-Pressure Composite Butt-Weld Joint. Polymer Composites, Vol. 24, No. 1, pp.60-67, (February, 2003), (Also presented in Engineering Technology Conference on Energy (ETCE) 2002, ASME, Houston, Texas, February 4-5, 2002.)
  153. J.E. Helms, G. Li, and S.S. Pang. Buckling Analysis of A Taper-Taper Adhesive-Bonded Composite Joint. Polymer Composites, Vol. 24, No. 1, pp. 45-52, (February, 2003), (Also presented in Engineering Technology Conference on Energy (ETCE) 2002, ASME, Houston, Texas, February 4-5, 2002.).
  154. S. Kidane, G. Li, J.E. Helms, S.S. Pang, and E. Woldesenbet. Buckling Load Analysis of Grid Stiffened Composite Cylinders. Composites Part B: Engineering, Vol. 33, No. 1, pp. 1-9, (January, 2003), (Also presented in Engineering Technology Conference on Energy (ETCE) 2002, ASME, Houston, Texas, February 4-5, 2002.).
  155. G. Li, D. Mukai, S.S. Pang, J.E. Helms, S.I. Ibekwe, and W. Alaywan. Stiffness Degradation of FRP Strengthened RC Beams Subjected to Hygrothermal and Aging Attacks. Journal of Composite Materials, Vol. 36, No. 7, pp. 795-812, (April, 2002). (Also presented in Engineering Technology Conference on Energy (ETCE) 2001, ASME, Houston Texas, February 2-4, 2001.)
  156. G. Li, S.S. Pang, E. Woldesenbet, M. Stubblefield, P.F. Mensah, and S.I. Ibekwe. Investigation of Preperg Bonded Composite Single-Lap Joint. Composites Part B: Engineering, Vol. 32, No. 8, pp. 651-658, (December, 2001).
  157. G. Li, J.E. Helms, S.S. Pang, and K.C. Schulz. Analytical Modeling of Tensile Strength of Particulate Filled Composites. Polymer Composites, Vol. 22, No. 5, pp.593 – 603, (October, 2001).
  158. S.S. Pang, G. Li, J.E. Helms, and S.I. Ibekwe. Influence of Ultraviolet Radiation on the Low Velocity Impact Response of Laminated Beams. Composites Part B: Engineering, Vol. 32, No. 6, pp. 521-528, (September, 2001), (Also presented in Engineering Technology Conference on Energy (ETCE) 2001, ASME, Houston, Texas, February 2-4, 2001.)
  159. J.E. Helms, G. Li, and S.S. Pang. Impact Resistance of a Composite Laminate Bonded to a Metal Substrate. Journal of Composite Materials, Vol. 35, No. 3, pp.237-252, (February, 2001), (Also presented in Engineering Technology Conference on Energy (ETCE) 1999, ASME, Houston, Texas, February 5-7, 1999.).
  160. G. Li, Y. Zhao, and S.S. Pang. Micromechanical Modeling of Polymer Modified Asphalt at Low Temperatures. Journal of Elastomers and Plastics, Vol. 32, No. 4, pp. 283 – 301, (October, 2000).
  161. G. Li, S.S. Pang, J.E. Helms, and S.I. Ibekwe. Low Velocity Impact Response of GFRP Laminates Subjected to Cycling Moisture. Polymer Composites, Vol. 21, No. 5, pp. 686 – 695, (October, 2000).
  162. G. Li, Y. Zhao, and S.S. Pang. Analytical Modeling of Particle Size and Cluster Effects on Particulate-Filled Composite. Materials Science & Engineering A, Vol. 271, No. 1, pp. 43 – 52, (November, 1999).
  163. G. Li, S.S. Pang, Y. Zhao, and S.I. Ibekwe. Local Buckling Analysis of Composite Laminate with Large Delaminations Induced by Low Velocity Impact. Polymer Composites, Vol. 20, No. 5, pp. 634 – 642, (October, 1999), (Also presented in Engineering Technology Conference on Energy (ETCE) 1999, ASME, Houston, Texas, February 5-7, 1999.).
  164. G. Li, Y. Zhao, S.S. Pang, and Y. Li. Effective Young’s Modulus Estimation of Concrete. Cement and Concrete Research, Vol. 29, No. 9, pp. 1455 – 1462, (September, 1999).
  165. G. Li, Y. Li, J.B. Metcalf, and S.S. Pang. Elastic Modulus Prediction of Asphalt Concrete. ASCE Journal of Materials in Civil Engineering, Vol. 11, No. 3, pp. 236 – 241, (August, 1999).
  166. G. Li, Y. Zhao, and S.S. Pang. Four-Phase Sphere Modeling of Effective Bulk Modulus of Concrete. Cement and Concrete Research, Vol. 29, No. 6, pp. 839 – 845, (June, 1999).
  167. G. Li, Y. Zhao, S.S. Pang, L.Y. Wei, X.J. Deng. Laboratory studies on cement-asphalt emulsion composite. Journal of Transportation Research Record, 1652, pp. 210-214, (June, 1999). (Also presented in 7th International Conference on Low Volume Roads, Baton Rouge, USA, April, 1999.).
  168. G. Li, Y. Zhao, and S.S. Pang. A Three-layer Built-in Analytical Modeling of Concrete. Cement and Concrete Research, Vol. 28, No. 7, pp. 1057 – 1070, (July, 1998).
  169. G. Li, Y. Zhao, S.S. Pang, and W. Huang. Experimental Study of Cement-Asphalt Emulsion Composite. Cement and Concrete Research, Vol. 28, No.5, pp. 635 – 641, (May, 1998).

Refereed Journal Papers Published in Chinese Journals

  1. G. Li, Q. Li, D. Lu, and L. Wei, “Experimental Study of Semi-rigid Compound Material of Emulsified Rubber Asphalt Concrete,” Journal of Hebei University of Technology, Vol. 29, No. 3, pp. 160-168, (June, 2000), (in Chinese).
  2. G. Li, W. Huang, X. Deng, and S. Yang, “Microscopic Thermal Stress Analysis of Cement Based Pavement Composite,” Engineering Mechanics (ISSN 1000 – 4750), Vol. 15, No. 2, pp. 69 – 75, (May, 1998), (in Chinese).
  3. G. Li, W. Huang, and X. Deng, “On Cement-Asphalt Emulsion Pavement Composite,” Journal of Chinese Ceramic Society (ISSN 0454 – 5648), Vol. 26, No. 4, pp.444 – 450, (August, 1998), (in Chinese).
  4. Q. Li, G. Li, and L. Wei, “Study of Deflection Equivalent Conversion Method for Overload Axles,” Journal of Chongqing Jiaotong Institute (ISSN 1001 – 716X), Vol. 17, No. 1, pp. 62 – 68, (March, 1998), (in Chinese).
  5. G. Li, “Statistical Analyses of Non-homogeneous Samples,” Journal of Hebei University of Technology (ISSN 1007 – 2373), Vol. 27, No. 1, pp. 32 – 37, (January, 1998), (in Chinese).
  6. G. Li, W. Huang, X. Deng, and Y. Xiang, “Fatigue of Rubberized Asphalt Emulsion Modified Cement Concrete and Its Application,” Journal of Chongqing Jiaotong Institute (ISSN 1001 – 716X), Vol. 16, No. 3, 80-87, (September, 1997) (in Chinese).
  7. G. Li, L. Wei, M. Wang, and W. Huang, “Experimental Study of Rubberized Asphalt Emulsion Modified Portland Cement Concrete,” Journal of Hebei University of Technology (ISSN 1007 – 2373), Vol. 26, pp. 48 – 57, (June, 1997), (in English).
  8. Q. Li, L. Wei, and G. Li, “Damage Effect of Overload Axes on Pavement Structures,” Journal of Hebei University of Technology (ISSN 1007 – 2373), Vol. 26, pp. 23 – 30, (June, 1997), (in English).
  9. G. Li, W. Huang, X. Deng, L. Wei, and Z. Jiang, “Thermal Stress Analyses of Cement-Based Semi-Rigid Surface Course of Composite Materials,” Journal of Chinese Ceramic Society (ISSN 0454 – 5648), Vol. 25, No. 6, pp. 627 – 634, (December, 1997), (in Chinese).
  10. G. Li, W. Huang, and X. Deng, “Microscopic Stress Analyses of Polymer Modified Asphalt,” Journal of Hebei University of Technology (ISSN 1007 – 2373), Vol. 26, No. 4, pp. 74 – 80, (October, 1997), (in Chinese).
  11. G. Li, W. Huang, X. Deng, and G. Yang, “Non-linear Rheological Model of Asphalt Concrete and Pavement Cracking Temperature Prediction,” Journal of Chongqing Jiaotong Institute (ISSN 1001 – 716X), Vol. 16, No. 1, pp. 50 – 59, (March, 1997), (in Chinese).
  12. G. Li and X. Deng, “Laboratory Evaluation for Rubberized Asphalt Emulsion Modified Cement-Based Composite,” Journal of Hebei University of Technology (ISSN 1007 – 2373), Vol. 25, pp. 63 – 67, (June, 1996), (in English).
  13. G. Li and X. Deng, “Research on Critical Porosity of Pavement Porous Course,” China Journal of Highway and Transport (ISSN 1001 – 7372), Vol. 9, No. 2, pp. 28 – 33, (June, 1996), (in Chinese).
  14. G. Li, W. Huang, and X. Deng, “Experimental Study on the Performance of Rubberized Asphalt Emulsion Modified Cement Concrete,” Journal of Southeast University (ISSN 1001 – 0505), Vol. 26, No. 6A, pp. 55 – 61, (November, 1996), (in Chinese).
  15. C. Li, L. Wei, G. Li, and Z. Jiang, “Polymer Modified Asphalt: Review,” Beijing Highway, No. 5, pp. 18 – 21, (October, 1996), (in Chinese).
  16. G. Li, W. Huang, and X. Deng, “On Joint Displacement of Cement Concrete Pavement,” Journal of Chongqing Jiaotong Institute (ISSN 1001 – 716 X), Vol. 15, No. 4, pp. 48 – 53, (December, 1996), (in Chinese).
  17. G. Li, W. Huang, and X. Deng, “Experimental Research on Cement Based Semi-Rigid Pavement Composite,” East China Highway (ISSN 1001 – 7291), No. 4 (Total No. 101), pp. 8 – 12, (August, 1996), (in Chinese).
  18. G. Li and X. Deng, “Chaos Analysis of Microcrack Evolution in Cement Concrete,” Journal of Chongqing Jiaotong Institute (ISSN 1001 – 716X), Vol. 15, No. 1, pp. 22 – 26, (March, 1996), (in Chinese).
  19. G. Li and J. Jiang, “Fractals in Gradation Aggregates,” Journal of Hebei Institute of Technology (ISSN 1000 – 5358), Vol. 24, pp. 65 – 77, (June, 1995), (in English).
  20. G. Li and X. Deng, “Fractal Effects on Graded Aggregates,” Concrete (ISSN 1002 – 3550), No. 1 (Total No. 93), pp. 3 – 8, (January, 1995), (in Chinese).
  21. G. Li and X. Deng, “On Critical Damage of Cement Concrete,” Journal of Chongqing Jiaotong Institute (ISSN 1001 – 716X), Vol. 14, No. 3, pp. 21 – 26, (September, 1995), (in Chinese).
  22. G. Li and X. Deng, “Grey Optimization Method for the Determination of Satisfied Management Strategy of Asphalt Pavement Network,” East China Highway (ISSN 1001 – 7291), No. 1 (Total No. 92), pp. 18 – 23, (February, 1995), (in Chinese).
  23. G. Li and X. Deng, “On Fractal Gradation of Aggregates,” Journal of Chongqing Jiaotong Institute (ISSN 1001 – 716X), Vol. 14, No. 2, pp. 38 – 43, (June, 1995), (in Chinese).
  24. G. Li and Z. Jiang, “Unacertainty and its Effects on Pavement Reliability,” East China Highway (ISSN 1001 – 7291), No. 4 (Total No. 95), pp. 24 – 27, (August, 1995), (in Chinese).
  25. G. Li, B. Sun, W. Li, “Research on Recracking Model of Asphalt Pavement,” Journal of Hebei Institute of Technology (ISSN 1000 – 5358), Vol. 24, No. 2, pp. 86 – 92, (June, 1995), (in Chinese).
  26. G. Li and Z. Jiang, “Study on Performance Index of Bituminous Pavement,” Journal of Chongqing Jiaotong Institute (ISSN 1001 – 716X), Vol. 14, No. 1, pp. 47 – 55, (March, 1995), (in Chinese).
  27. G. Li and F. Wang, “Analytical Modeling of Semi-Rigid Pavement with Finite Size,” East China Highway (ISSN 1001 – 7291), No. 5 (Total No. 90), pp. 25 – 28, (October, 1994), (in Chinese).
  28. G. Li, “Temperature Stress for an Infinite Thin Plate on a Dual-Parameter Foundation,” Journal of Hebei Institute of Technology (ISSN 1000 – 5358), Vol. 23, No. 1, pp. 102 – 108, (January, 1994), (in Chinese).
  29. G. Li, S. Niu, X. Zhou, W. Li, B. Yan, and A. Tong, “Laboratory Evaluation for Semi-Rigid Pavement Material,” Asphalt, Vol. 3, No. 3, pp. 43 – 45, (September, 1993), (in Chinese).
  30. G. Li, “Allowable Deflection of High Grade Semi-Rigid Pavement,” Asphalt, Vol.3, No. 2, pp. 23 – 26, (June, 1993), (in Chinese).
  31. G. Li, “Polymer Modified Asphalt and its Application Pattern,” Asphalt, Vol. 2, No. 4, pp. 26 – 28, (December, 1992), (in Chinese).
  32. G. Li, “The Conner Influence Plane of a Rectangular Thin Plate with Free Edges on a Winkler Foundation,” Journal of Hebei Institute of Technology (ISSN 1000 – 5358), Vol. 19, No. 4, pp. 102 – 113, (October, 1990), (in Chinese).
  33. G. Li, “Temperature Stresses of a Circular Thin Plate Supported by Winkler Foundation,” Journal of Hebei Institute of Technology (ISSN 1000 – 5358), Vol. 18, No. 3, pp. 96 – 107, (July, 1989), (in Chinese).

Book Chapters

  1. G. Li, “Pavement and Bridge Management System,” in W. Guo ed.: Expressway Management, People’s Communication Publishing House (Chapter 4) (ISBN 7-114-02640-4), pp. 123-184, Beijing, China, October, 1997 (in Chinese).
  2. J.Q. Cheng, G. Li, S.S. Pang, “Smart Adhesively Bonded Composite Joints: Analysis and Design,” in Tobias G. Wouters ed: Leading-edge Composite Materials Research, Nova Science Publisher (Chapter 2) (ISBN 1-60021-995-0), pp.73-147, New York, March, 2008.
  3. G. Li and V.D. Muthyala, “Advanced Grid Stiffened Fiber Reinforced Polymer Composite Structures,” in Jonas C. Wolf and Luka Lange ed.: Glass Materials Research Progress, Nova Science Publishers, Inc. (Chapter 1), (ISBN 978-1-60456-578-2), pp. 1-38, New York, September, 2008.
  4. G. Li and M. John, “A Shape Memory Polymer Based Self-Healing Smart Syntactic Foam,” in Mikhail Lechkov and Sergej Prandzheva ed.: Encyclopedia of Polymer Composites: Properties, Performance and Applications, Nova Science Publishers, Inc. (Chapter 11), (ISBN: 978-1-60741-717-0), pp.1-29, New York, September, 2009.
  5. F. Tavangarian, G. Li, and Y. Li, “Single-and Multiwalled Carbon Nanotubes Toxicity and Potential Applications in Neuroregeneration,” (Chapter 18) in Nancy A. Monteiro-Riviere and C. Lang Tran ed.: Nanotoxicology: Progress toward Nanomedicine (2ed), ISBN-10: 1482203871, CRC Press, New York, (March 2014).
  6. H. Meng, G. Li, and J. Hu. Phase change fibers and assemblies. In X. Tao ed. Handbook of Smart Textiles, ISBN 978-981-4451-44-4, Springer, Singapore, (November, 2015).
  7. H. Meng and G. Li. Shape memory and self-reinforcing polymers as sutures. In L’Hocine Yahia ed. Shape Memory Polymers (SMPs) for Biomedical Applications, ISBN 978-0-85709-698-2, Elsevier, Cambridge, UK, (March, 2015).
  8. G. Li and H. Meng. “Overview of Crack Self-Healing,” in G. Li and H. Meng ed. Recent Advances in Smart Self-healing Polymers and Composites (Chapter 1). ISBN: 978-1-78242-280-8, Elsevier, Cambridge, UK, (June, 2015).
  9. G. Ji, P. Zhang, J. Nji, M. John, and G. Li. “Shape Memory Polymer-based Self-healing Composites,” in G. Li and H. Meng ed. Recent Advances in Smart Self-healing Polymers and Composites (Chapter 11). ISBN: 978-1-78242-280-8, Elsevier, Cambridge, UK, (June, 2015).
  10. H. Meng, P. Zhang, O. Ajisafe, and G. Li. “Self-healing Materials with Embedded Shape Memory Polymer Fibers and Wires,” in G. Li and H. Meng ed. Recent Advances in Smart Self-healing Polymers and Composites (Chapter 12). ISBN: 978-1-78242-280-8, Elsevier, Cambridge, UK, (June, 2015).
  11. G. Ji, Z. Ouyang, and G. Li. “Effect of Bondline Thickness on the Traction-Separation Laws of Adhesively Bonded Joint,” in Y. Liu ed., Book Series: Frontiers in Aerospace Science, Aerospace Structures and Materials (Volume 1, Chapter 4, pp. 154-239), ISBN: 978-1-68108-306-3, Bentham Science, (2016).
  12. H. Meng and G. Li. Controlled Activation Schemes of SMPs for Aerospace Applications. In G.P. Tandon, A.J.W. McClung, and J.W. Baur ed., Shape Memory Polymers for Aerospace Applications: Novel Synthesis, Modeling, Characterization and Design (Chapter 1), ISBN: 978-1-60595-118-8, DEStech Publications, Inc., (2016).

Refereed Conference Proceeding Papers

  1. E. Amoako, P. Mensah, S. Akwaboa, S. Ibekwe, G. Li. Parametric Study of SLM processing parameters on In-situ residual stress (HT2019-3623), 2019 ASME Summer Heat Transfer Conference, Bellevue, MA, July 15-18, 2019.
  2. L. Santos, A.D. Taleghani and G. Li. Smart Expandable Polymer Cement Additive to Improve Zonal Isolation. SPE-191822-MS, presented at SPE Eastern Regional Meeting, October 7-11, 2018, Pittsburgh, Pennsylvania, USA.
  3. A.K. Mansour, C. Ezeakacha, A.D. Taleghani, G. Li, S. Salehi. Smart Lost Circulation Materials for Productive Zones. SPE-187099-MS, presented at SPE Annual Technical Conference and Exhibition, October 9-11, 2017, San Antonio, Texas, USA.
  4. F. Tavangarian, L.R. Childs, G. Li, D.L. Wooten, B.D. Cornwell, “Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds,” The Minerals, Metals, and Materials Society (TMS) 2017, February 26 – March 2, 2017, San Diego, California.
  5. F. Tavangarian, G. Li, “The influence of glassy phase on the crack healing efficiency of silicon carbide/spinel ceramic,” The Minerals, Metals, and Materials Society (TMS) 2017, February 26 – March 2, 2017, San Diego, California.
  6. Mansour, A.K., Taleghani, A. D, and Li, G., 2017: “Smart Expandable LCMs; A Theoretical and Experimental Study.” Paper AADE-17-NTCE-074, presented at the 2017 AADE National Technical Conference and Exhibition in Houston, Texas, USA, April 11-12, 2017.
  7. Mansour, A.K., Taleghani, A. D., and Li, G., 2017: “Smart Lost Circulation Materials for Wellbore Strengthening.” Paper ARMA 17-0492, presented at the 51st US Rock Mechanics/Geomechanics Symposium in San Francisco, California, USA, June 25-28, 2017.
  8. L. Santos, A.D. Taleghani and G. Li, “Expandable Diverting Agents to Improve Efficiency of Refracturing Treatments,” Unconventional Resources Technology Conference, Austin, Texas, July 24-26, 2017.
  9. L. Santos, A.D. Taleghani, G Li, “Smart Expandable Proppants to Achieve Sustainable Hydraulic Fracturing Treatments,” SPE Annual Technical Conference and Exhibition, SPE-181384-MS, Dubai, UAE, September 26-28, 2016.
  10. D. Taleghani, G. Li, M. Moayedi, “The Use of Temperature-Triggered Polymers to Seal Cement Voids and Fractures in Wells,” SPE Annual Technical Conference and Exhibition, SPE-181384-MS, Dubai, UAE, September 26-28, 2016.
  11. Q. Yang and G. Li, “Temperature and rate dependent thermomechanical modeling of shape memory polymers with physics based phase evolution law,” 2015 ASME Applied Mechanics and Materials Conference, June 29-July 1, 2015, Seattle, Washington.
  12. G. Li, G. Ji, and H. Meng, “Shape Memory Polymer Based Sealant for Expansion Joint – A Case Study,” GeoShanghai International Conference 2014, May 26-28, 2014, Shanghai, China (Keynote Speaker).
  13. G. Ji, G. Li, and S.S. Pang, “Novel Self-Healing Sandwich Panel with Shape Memory Alloy Millitube Reinforced Shape Memory Polymer Core,” Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition IMECE2013, Paper No. IMECE2013-65672, San Diego, CA, November 15-21, 2013.
  14. G. Ji, G. Li, and S.S. Pang, “High Velocity and Low Velocity Impact Tests of Novel Sandwich Panel with Millitubes Grid Stiffened SMP Core,” Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012, Paper No. IMECE2012-86141, Houston, TX, November 9-15, 2012.
  15. A. Shojaei, G.Z. Voyiadjis, and G. Li, “Continuum Damage Mechanics Application in Thermodynamics-Based Healing Theories,” Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012, Paper No. IMECE2012-86593, Houston, TX, November 9-15, 2012.
  16. G. Li, G. Ji, and S.S. Pang, S. “Novel Impact/Debonding Tolerant Sandwich Panel with millitubes Grid Stiffened Foam Core,” Proceedings of the ASME 2012 Pressure Vessels & Piping Division / K-PVP Conference, PVP 2012-78547,  Toronto, Ontario, Canada, July 15-19, 2012.
  17. G. Ji, G. Li, and S.S. Pang, “Multifunctional MWCNT Reinforced Self-Healing System,” Proceedings of the ASME 2012 Pressure Vessels & Piping Division / K-PVP Conference, PVP 2012-78759,  Toronto, Ontario, Canada, July 15-19, 2012.
  18. G. Li, A. King, and T. Xu, “Smart Syntactic Foam Sealant Trained by Two-Stage Programming,” Proceedings of the 3rd International Society for Asphalt Pavements Symposium, Nanjing, China, May 23-26, 2012.
  19. J. Nji and G. Li, “A Smart Polymer Composite for Repeatedly Self-healing Impact Damage in Fiber Reinforced Polymer (FRP) Vessels,” Proceedings of ASME 2011 Pressure Vessels &Piping Conference, Paper No. PVP2011-57646, Baltimore, Maryland, Washington, July 17-21, (2011).
  20. G. Ji, Z. Ouyang, G. Li, and S.S. Pang, “Impact/Debonding Tolerant Sandwich Panel with Aluminum Tube Reinforced Foam Core,” Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, Paper No. IMECE2011-65724, Denver, Colorado, USA, November 11-17, 2011.
  21. A. Shojaei, G. Li, and G.Z. Voyiadjis, “Continuum Damage Mechanics Application in Thermodynamic Based Healing Theories,” Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, Paper No. IMECE2011-64893, Denver, Colorado, USA, November 11-17, 2011.
  22. G. Li and T. Xu. A Shape Memory Polymer Based Self-Healing Syntactic Foam Sealant for Expansion Joint. Structures Congress, pp. 2078-2089, (2011), http://dx.doi.org/10.1061/41171(401)181.
  23. G. Ji, Z. Ouyang, G. Li, S. Ibekwe, and S.S. Pang, “Healable and Repeatable Adhesive Bonded Joint,” Proceedings of ASME 2011 Pressure Vessels &Piping Conference, Paper No. PVP2011-58082, Baltimore, Maryland, Washington, July 17-21, (2011).
  24. G. Ji, Z. Ouyang, G. Li, W. Xu, D. Jerro, and S.S. Pang, “Effects of adhesive thickness on global and local Mixed Mode I/II interfacial fracture of bonded joints,” Proceedings of ASME 2011 Pressure Vessels &Piping Conference, Paper No. PVP2011-58084, Baltimore, Maryland, Washington, July 17-21, (2011).
  25. M. Vijay, Z. Ouyang, G. Ji, G. Li, D. Jerro, “Characterization of Short Basalt Fiber Reinforced Syntactic Foams,” Proceedings of ASME 2011 Pressure Vessels &Piping Conference, Paper No. PVP2011-57730, Baltimore, Maryland, Washington, July 17-21, (2011).
  26. R. Madawela, Z. Ouyang, G. Ji, G. Li, S. Ibekwe, “Mechanical Properties of New Hybrid Foam Material: Open-cell Metallic Foam Filled with Close-cell Syntactic Foam,” Proceedings of ASME 2011 Pressure Vessels &Piping Conference, Paper No. PVP2011-57725, Baltimore, Maryland, Washington, July 17-21, (2011).
  27. G. Li, J. Nji, and N. Uppu, “A Smart Self-Healing Particulate Composite,” Proceedings of NSF CMMI Conference, Atlanta, GA, January 4-7 (2011).
  28. G. Ji, Z. Ouyang, G. Li, D. Jerro, and S.S. Pang, “Effect of Bondline Thickness on Interfacial Fracture of Laminated Composite Materials,” Proceedings of ASME 2010 Pressure Vessels &Piping Conference, Paper No. PVP2010–25714, Bellevue, Washington, July 18–22 (2010).
  29. Z. Ouyang, W. Xu, G. Ji, G. Li, H.D. Jerro, and S.S. Pang, “Nonlinear Model of Torsional Fracture in Adhesive Pipe Joints,” Proceedings of ASME 2010 Pressure Vessels & Piping Conference, Paper No. PVP2010–25717, Bellevue, Washington, July 18–22 (2010).
  30. G. Ji, Z. Ouyang, G. Li, S.S. Pang, and S. Ibekwe, “Effect of Adhesive Thickness on Interfacial Fracture ofBonded Steel Joints,” Proceedings of ASME 2010 Pressure Vessels & Piping Conference, Paper No. PVP2010–25755, Bellevue, Washington, July 18–22 (2010).
  31. Z. Ouyang, G. Ji, G. Li, S.S. Pang, and S. Ibekwe, “A New Idea of Pure Mode–I Fracture Test of Bonded Bi–Materials,” Proceedings of ASME 2010 Pressure Vessels & Piping Conference, Paper No. PVP2010–25759, Bellevue, Washington, July 18–22 (2010).
  32. J.Q. Cheng and G. Li, “Blast response analysis of composite plate by multi-domain Hermite Differential Quadrature Method (MD-HDQ),” (paper No. IMECE2007 – 44051), ASME International Mechanical Engineering Congress and Exposition (IMECE), Seattle, Washington, (November 11-15, 2007).
  33. K. Crosby, S. Ibekwe, G. Li, S.S. Pang, “Tiered Mentoring in a Cross-Disciplinary and Multi-Institutional Research Project,” Proceedings of the 2007 ASEE Annual Conference & Exposition, Honolulu, Hawaii, (June 24-27, 2007).
  34. M. Zhang, G. Li, S.S. Pang, Z.G. Lian, C.G. Liu, S. Ibekwe, K. Lian, “Viable LIGA/LIGA-Like Fabrications to Enhance Pool Boiling Heat Transfer”, HARMST/2007 7th International Workshop on High-Aspect Ratio Micro-Structure Technology, Besancon, France, June 7-9, 2007. P.101.
  35. J.Q. Cheng, G. Li, and SS Pang, “Adhesively bonded smart composite joints: an overview,” ANTEC 2007, Cincinnati, OH, May, 6-9, 2007.
  36. G. Li and D. Maricherla, “Advanced Grid Stiffened FRP Tube Encased Concrete Cylinders,” Proceedings of the Third International Conference on Composites in Civil Engineering, Miami, Florida, December 13-15, 2006.
  37. M. John and G. Li, “Hybrid Square FRP/Steel Grid Tube Confined Concrete Cylinders,” Proceedings of the Third International Conference on Composites in Civil Engineering, Miami, Florida, December 13-15, 2006.
  38. K. V. Singh, A.P.S. Sawhney, N. Sachinvala, G. Li, S.-S. Pang, B. Condon, and R. Parachuru, “Applications and future of Nanotechnology in Textiles”, Beltwide Cotton Conferences, San Antonio, TX, January 3-6, 2006, Proceedings of the Beltwide Cotton Conferences, National Cotton Council of America.
  39. A.P.S. Sawhney, K.V. Singh, N. Sachinvala, G. Li, S.-S. Pang, and B. Condon, “Successful Size-Free Weaving of Cotton Yarns on a Modern High-Speed Machine: A Progress Report”, Beltwide Cotton Conference, San Antonio, TX, January 3-6, 2006, Proceedings of the Beltwide Cotton Conferences, National Cotton Council of America.
  40. M. John and G. Li, “FRP Wrapped Steel Grid Tube Confined Square Concrete Cylinders,” ASEE GSW Conference Proceedings, March 15-17, 2006, Baton Rouge, LA.
  41. I. V Volety, G. Li, and Y. Ram, “Confinement Model for FRP Confined Concrete Cylinders,” ASEE GSW Conference Proceedings, March 15-17, 2006, Baton Rouge, LA.
  42. S.G. Krishna, K.V. Singh, G. Li, and S.S. Pang, “Identification of Composite Beam Delamination Parameters,” Proc. 2006 SPE Annual Technical Conference (ANTEC), Paper #103048, Charlotte, North Carolina, May 7-11 (2006).
  43. X. Li, M.A. Stubblefield, G. Li, H. D. Jerro, “Fusion and Visualization of 3D Image and Elevation Data in Computer Automated Virtual Environment (CAVE),” Paper No. 14403, ASCE Aerospace Division International Conference – Earth & Space 2006, League City, Houston, TX, March 05-08, 2006.
  44. A.P.S. Sawhney, K.V. Singh, N. Sachinvala, S.S. Pang, T.A. Calamari, and G. Li, “Mechanical Analysis of Weaving Process Towards Size-Free Weaving,” Paper #1666, Beltwide Cotton Conferences, New Orleans, January 4-7, 2005, also appeared in The Proceedings of the Beltwide Cotton Conferences, National Cotton Council of America, pp. 2706-2711, Memphis, TN, 2005.
  45. K. Singh, G. Li, R. Jones, and S.S. Pang, “Damage Identification in Composite Structures from Vibration Data,” SAMPE’05, Long Beach, CA, May 1-5, 2005.
  46. B. Huang, G. Li, and X. Shu, “Three-layered hot-mix asphalt mixture,” in: K.J. Bathe, ed., Proceedings of Computational Fluid and Solid Mechanics 2005, MIT, paper No. 061-303, published by Elsevier, pp. 261-263, 2005.
  47. K. Singh, G. Li, S.S. Pang, and Y.M. Ram, “Identification of Composite Beam Parameters from Vibration Data,” ANTEC 2005, Boston, May 1-4, 2005.
  48. P. Mylavarapu, E. Woldesenbet, N. Gupta, A. Davis and G. Li, Ultrasonic Characterization of Bond Line Parameters in Adhesively Bonded Carbon-Epoxy Composites, Proceedings of the American Society for Composites 19th Annual Technical Conference – 2004, Oct 17-20, 2004, Atlanta, GA.
  49. P. Mylavarapu, G. Li, N. Gupta, R. Maharsia, E. Woldesenbet, Ultrasonic signal attenuation in syntactic foams filled with rubber particles, Submitted to ASME – 2004 Mechanical Engineering Congress and Exposition, Nov 14-19, 2004, Anaheim, CA.
  50. R. Maharsia, N. Gupta, and G. Li, Compressive properties of nanoclay syntactic foams for sandwich core applications, Society for Experimental Mechanics X International Congress & Exposition, Costa Mesa, CA. June 7- 10, 2004, Paper #25.
  51. N. Gupta, G. Li, G., H.D. Jerro, E. Woldesenbet, E. and S.S. Pang, Effect of nano-size clay particles on the flexural properties of syntactic foams, Society for Plastics Engineers ANTEC 2004, Chicago, IL, Paper #777.
  52. J.A. Peck, S.S. Pang, G. Li, R.A. Jones, and B.H. Smith, UV Cured FRP Joint Thickness Effect on Coupled Composite Pipes, SAMPE 2004, May 16-20, 2004, Long Beach, CA.
  53. S. Ibekwe, P.F. Mensah, A. Jana, G. Li, and M.A. Stubblefield, “Shear Strength Characteristics of An Ultrasonic Welded Lap Shear Joint,” Engineering Technology Conference on Energy (ETCE) 2002, ASME, Houston Texas, February 4-6, 2002.
  54. G. Li, S.S. Pang, R.A. Jones, J.E. Helms, E. Woldesenbet, “Joining Composite Pipes Using Hybrid Heat-Activated Coupling and Adhesive Bonding,” Engineering Technology Conference on Energy (ETCE), Houston, TX, February 5 – 7, 2001.
  55. S.I. Ibekwe, P. Mensah, G. Li, and S.S. Pang, “Influence of Temperature Variation on the Post Impact Strength of Glass Fiber Composite Materials,” Engineering Technology Conference on Energy (ETCE), Houston, TX, February 5 – 7, 2001.
  56. J.E. Helms, G. Li, and B.H. Smith, “Analysis of Isogrid Stiffened Composite Cylinders,” Engineering Technology Conference on Energy (ETCE), Houston, TX, February 5 – 7, 2001.
  57. S. Ibekwe, P.F. Mensah, G. Joshi, G. Li, and M. Stubblefield, “Experimental and Analytical Strength Characterization of an Ultrasonic Welded Lap Shear Joint,” Engineering Technology Conference on Energy (ETCE), Houston, TX, February 5 – 7, 2001.
  58. P.F. Mensah, M.A. Stubblefield, O. Soysal, and G. Li, “Modeling of Heat-Activated Coupled Composite Pipes in a Cryogenic Thermal Environment,” Engineering Technology Conference on Energy (ETCE), Houston, TX, February 5 – 7, 2001.
  59. P.F. Mensah, M.A. Stubblefield, O. Soysal, and G. Li, “Numerical Model for Thermal and Material Characterization of FRP Composite Pipes Exposed to Hydrocarbon Fire,” Engineering Technology Conference on Energy (ETCE), Houston, TX, February 5 – 7, 2001.
  60. S.S. Pang, G. Li, R.H. Lea, R.A. Jones, and M.A. Stubblefield, “Development of A Heat-Activated Coupling for Composite Pipe System,” Third International Conference On Composite Materials For Offshore Operations, Houston, TX, October 31 – November 2, 2000.
  61. S.I. Ibekwe, G. Li, and S.S. Pang, “Low Velocity Impact of Laminated Composite at Low Temperature and Analytical Modeling of Compressive Local Buckling,” Energy Source Technology Conference & Exhibition (ETCE)/Offshore Mechanics and Arctic Engineering (OMAE) joint conference, ASME, New Orleans, USA, February, 2000.
  62. G.Li, S.S. Pang, P. Mensah, and M.A. Stubblefield, “Stress Analysis of A Heat-Activated Coupling Joint Subjected to Hydrostatic Internal Pressure,” Energy Source Technology Conference & Exhibition (ETCE)/Offshore Mechanics and Arctic Engineering (OMAE) joint conference, ASME, New Orleans, USA, February, 2000.
  63. P. Mensah, G. Li, S.S. Pang, and M.A. Stubblefield, “Transient Thermal Analysis of A Heat-Activated Coupling Joint,” Energy Source Technology Conference & Exhibition (ETCE)/Offshore Mechanics and Arctic Engineering (OMAE) joint conference, ASME, New Orleans, USA, February, 2000.
  64. J.E. Helms and G. Li, “Analysis of Taper-Taper Joints in Composite Pipe under Tensile Loading,” Energy Source Technology Conference & Exhibition (ETCE)/Offshore Mechanics and Arctic Engineering (OMAE) joint conference, ASME, New Orleans, USA, February, 2000.
  65. S.I. Ibekwe, G. Li, S.S. Pang, and S. Orji, “An Experimental Study of Low Velocity Impact Response of Composite Laminates at Elevated Temperature,” Energy Sources Technology Conference & Exhibition (ETCE’99), ASME, Houston, USA, February, 1999.
  66. G. Li, Yi, Zhao, and S.S. Pang, “Micro-Thermal Stresses of Cement Based Composite,” Energy Sources Technology Conference & Exhibition (ETCE’98), ASME, Houston, USA, February, 1998.
  67. G. Li, Yi, Zhao, and S.S. Pang, “Micro-Modeling of Polymer Modified Asphalt Composite,” 56th Annual Technical Conference (NTEC’98), SPE, Atlanta, USA, May, 1998.

Presentations/Extended Abstracts

  1. J. Fan, S.I. Ibekwe, and G. Li. A thermoset polymer with giant rubbery state stress and energy output. Presented at the 26th Annual International Conference on Composites and Nano Engineering, Paris, French, July 15-21, (2018).
  2. C. Yan and G. Li. A Finite element model for lattice structure of shape memory polymer. Presented at the ACAP 2018 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 9-11, (2018).
  3. L. Lu and G. Li. Intrinsic healable and recyclable epoxy thermoset. Presented at the ACAP 2018 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 9-11, (2018).
  4. A. Li and G. Li. Facile UV-Curing of a High-Performance and Recyclable Thermoset Shape Memory Polymer with High Stress Output. Presented at the ACAP 2018 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 9-11, (2018). Presented at the ACAP 2018 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 9-11, (2018).
  5. J. Fan and G. Li. High enthalpy storage thermoset network with giant stress and energy output in rubbery state. Presented at the ACAP 2018 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 9-11, (2018).
  6. C. Hoffman, F. Dawan, S. Ibekwe, G. Li, and P. Mensah. Mechanical Properties of 3-D Printed Smart Composite Mini Wind Turbines. Advanced Energy Materials, University of Surrey, England, September 10 -12, (2018).
  7. G. Li. Additive manufacturing: from nano to macro scales. Presented at the ACAP 2017 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 16-18, (2017).
  8. J. Fan, S. Ibekwe, and G. Li. A Tunable Polymeric Artificial Muscle with Large Stroke at Low Actuation Temperature. Presented at the 25th Annual International Conference on Composites and Nano Engineering, Rome, Italy, July 16-22, (2017).
  9. L. Lu and G. Li. Multi-shape memory and tunable two-way shape memory effects of ionomer Surlyn. Presented at the ACAP 2017 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 16-18, (2017).
  10. J. Pan, G. Li, Y. He, Q. Deng, X. Zhang. Numerical Study on Shaped Charge with Wave-shaper. Presented at the ACAP 2017 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 16-18, (2017).
  11. P. Zhang and G. Li. Impact mitigation and on-demand damage healing by fishing line artificial muscle. GRC Multifunctional Materials Conference, Jan 31-Feb 5, 2016, Ventura, CA.
  12. Q. Yang and G. Li. Temperature and Rate Dependent Thermomechanical Modeling of SMPs with Physics Based Phase Evolution Law. 2016 Plasticity Conference, Jan 3-9, 2016, Kona, HI.
  13. G. Li. Bio-inspired Self-healing Composite. Presented at the ACAP 2015 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 6-9, (2015).
  14. G. Li. Stress Memory versus Shape Memory for Shape Memory Polymers. Presented at the ACAP 2014 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 20-22, (2014).
  15. G. Li and A. Shojaei. Comprehensive thermomechanical modeling of shape memory polymers including cyclic damage effects. Proceedings of Plasticity 2014, Freeport, Bahamas, January 3-8, 2014.
  16. S. Ibekwe, H. Meng, and G. Li. Various Shape Memory Effect of Polymers. 21st International Conference on Composite or Nano Engineering, Tenerife, Spain, July 19 – 28, 2013.
  17. G. Li, Oludayo Ajisafe, Harper Meng. Self-healing of thermosetting polymer by strain hardened shape memory polymer fibers. Proceedings of Louisiana EPSCoR RII LA-SiGMA 2013 Symposium, Baton Rouge, Louisiana, July 29, 2013.
  18. G. Li. Bio-mimetic Self-healing Composite. Presented at the ACAP 2013 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 13-16, (2013).
  19. A. Shojaei and G. Li. A Multiscale Viscoplastic Theory of Semicrystlline Glassy Polymers within the Micromechanics Framework, Proceedings of Plasticity 2014, Freeport, Bahamas, January 3-8, 2013.
  20. S.I. Ibekwe, A. King, and G. Li. Hybrid Programming of SMP Based Syntactic Foam. 20th International Conference on Composite/Nano Engineering (ICCE/20), July 22-26, 2012, Beijing, China.
  21. G. Li. A Bio-mimetic Self-healing Composite. Presented at the ACAP 2011 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 3-5, (2011).
  22. S.I. Ibekwe and G. Li. 3-D Confined Programming and Free-Shape Recovery of A SMP Based Syntactic Foam. 18th International Conference on Composite/Nano Engineering (ICCE/18), July 4-10, 2010, Anchorage, Alaska, USA.
  23. G. Li. Shape Memory Polymer-based Composites for Self-healing Structural-length Scale Damage. Presented at the ACAP 2010 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, June 11-12, (2010).
  24. G. Li. Self-healing Using Shape Memory Polymer. 17th International Conference on Composite/Nano Engineering (ICCE/17), Honolulu, Hawaii, July 26-August 1, (2009).
  25. G. Li, S.I. Ibekwe, M. John. A Shape Memory Polymer Based Self-healing Syntactic Foam. 17th International Conference on Composite/Nano Engineering (ICCE/17), Honolulu, Hawaii, July 26-August 1, (2009). (Also presented in the 2nd International Conference on Self-healing Materials, Chicago, June 28-July 2, (2009)).
  26. G. Li, W. Alaywan, S.I. Ibekwe, and S.S. Pang, “Advanced FRP Grid Tube Encased Concrete Cylinders,” 16th International Conference on Composite/Nano Engineering (ICCE/16), Kunming, China, July 20-26, 2008.
  27. J.Q. Cheng, G. Li, and S.S. Pang, “Free vibration analysis of the grid stiffened composite structure with various fillers”, First American Academy of Mechanics Conference, New Orleans, June 17-20, 2008(also presented in the ACAP 2008 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 9-11, (2008).).
  28. S.S. Pang, J.Q. Cheng, and G. Li, “Smart Adhesively Bonded Piezoelectric Composite Joints,” First American Academy of Mechanics Conference, New Orleans, June 17-20, 2008 (also presented in the ACAP 2008 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 9-11, (2008).).
  29. G. Li and R. Velamarthy, “Advanced Grid Stiffened FRP Tube-Encased Concrete Cylinders,” First American Academy of Mechanics Conference, New Orleans, June 17-20, 2008.
  30. M. John and G. Li, “Self-Healing of Smart Syntactic Foam under Multiple Impacts,” First American Academy of Mechanics Conference, New Orleans, June 17-20, 2008 (also presented in the ACAP 2008 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 9-11, (2008).).
  31. J. Nji and G. Li, “A CaO Enhanced Rubberized Syntactic Foam,” First American Academy of Mechanics Conference, New Orleans, June 17-20, 2008.
  32. V. Chakka and G. Li, “Quasi-Static and Impact Characterization of Sandwich Structures with an Iso-Grid Stiffened Syntactic Foam Core”, First American Academy of Mechanics Conference, New Orleans, June 17-20, 2008.
  33. M.A. Wahab, B. Bales, S. Netherland, J. Templet, J. Turner, and G. Li, “Design of a Prototype Filament Winder for Non-conventional Cross-sectional Pipes,” ACAP 2008 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 9-11, (2008).
  34. G. Li and N. Jones, “Rubberized syntactic foam,” ACAP 2007 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 26-28, (2007).
  35. A. Maha, M. Tyagi, S.-S. Pang, G. Li, “Multiphase Numerical Simulations for Micro-Geometries: Novel Heat Transfer Mechanism for Pressurized Water Reactors (PWR),” ACAP 2007 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 26-28, (2007).
  36. J.Q. Cheng, G. Li, and S.S. Pang, “Multi-domain Hermite-Differential Quadrature Method for Composite Structure Analysis,” ACAP 2007 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 26-28, (2007).
  37. G. Ji and G. Li, “Mechanical properties of Fiber-Reinforced Polymer Pipe Embedded with Optical Fiber,” ACAP 2007 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 26-28, (2007).
  38. S.S. Pang, J.Q. Cheng, and G. Li, “Adhesively Bonded Smart Composite Joints: An Overview,” ACAP 2007 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 26-28, (2007).
  39. G. Li, “Low Velocity Impact Degradation, Characterization, and Rehabilitation of Composite Structures,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 346-350, D. Hui Ed., Boulder Colorado, July 2-8, 2006 (Distinguished Speaker).
  40. M.S. Alam, G. Li, and W. Alaywan, “Experimental and Numerical Analysis of Flexural Properties of FRP Composite Sandwich Beam,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 7-8, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  41. G. Li, J.Q. Cheng, and S.S. Pang, “Experimental Study of Composite Sandwich Structures with a Grid Stiffened Hybrid Core,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 351-152, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  42. M. John and G. Li, “A Rubberized Nanocomposite Foam Core,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 254-255, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  43. J. Nji and G. Li, “Low Velocity Impact Response of a Hybrid Syntactic Foam Core,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 258-259, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  44. J.Q. Cheng and G. Li, “Analytical Modeling of Composite Sandwich Structure with Grid Stiffened Hybrid Core,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 98-99, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  45. S.I. Ibekwe, G. Li, S.S. Pang, and B.H. Smith, “Low Velocity Impact Response of a Laminated Composite Tube with a Metallic Bumper Layer,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 240-241, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  46. V.D. Muthyala and G. Li, “A Novel Cement Based Syntactic Foam,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 431-432, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  47. A. Samuel, A. Ghebreyesus, and G. Li, “Experimental Study of FRP Grid reinforced Concrete Beams,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 575-576, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  48. M. Zhang, S.Ibekwe, G. Li, S.S. Pang, K. Lian, “Using LIGA Based Microfabrication to Improve Overall Heat Transfer Efficiency of Pressurized Water reactor: I. Effects of Different Micro Pattern on Overall Heat Transfer,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 751-752, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  49. M. Tyagi, A. Maha, K.V. Singh, G. Li and S.S. Pang, “Simulation of Boiling Heat Transfer Around Micro Pin-Fin Exchanger: Progress and Challenges,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 751-752, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  50. R.C. Velamarthy, R. Maharsia, and G. Li, “Development and Characterization of Advanced Filament Wound Grid Stiffened Composite Cylinders,” Proceedings of the 14th International Conference on Composite/Nano Engineering, pp. 700-701, D. Hui Ed., Boulder Colorado, July 2-8, 2006.
  51. G. Li and S.S. Pang, “Impact Response of Composite Sandwich Structures with a Grid Stiffened Hybrid Core,” ACAP 2006 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 26-28, (2006).
  52. G. Li and S.S. Pang, “Advanced Grid Stiffened Composite Structures,” ACAP 2005 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Houston, Texas, May 20-22, (2005).
  53. G. Li and X. Li, “Composite Materials Education in the US: A Survey,” 11th International Conference on Composite Engineering (ICCE/11), Hilton Head, SC, August 8-14, (2004).
  54. G. Li, A. Ghebreyesus, S. Ibekwe, A. Jana, and R. Jones, “Repair of RC Beams Using UV Curing FRP Composites,” 11th International Conference on Composite Engineering (ICCE/11), Hilton Head, SC, August 8-14, (2004).
  55. K. V. Singh, G. Li, S. S. Pang, and R. Jones, “Direct and inverse eigenvalue problems in structural analysis and design,” 11th International Conference on Composite Engineering (ICCE/11), Hilton Head, SC, August 8-14, (2004).
  56. X. Li, G. Li, S.S. Pang, and M.A. Stubblefield, “Heat-Activated Coupling Technology for Joining Composite Pipes,” ACAP 2004 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Sugar Land, Texas, June 18-19 (2004).
  57. G. Li and S.S. Pang, “Repair/Rehabilitation and New Construction of Civil Infrastructure Using FRP Composites,” ACAP 2004 Science, Engineering and Technology Seminars (SETS) and Diversity Submit, Sugar Land, Texas, June 18-19 (2004).
  58. G. Li, M.A. Stubblefield, J.A. Peck, S.S. Pang, “Effect of Fiber Orientation on FRP Wrapped Concrete Columns,” presented at 10th International Conference on Composite Engineering (ICCE/10), New Orleans, July 21-26, 2003.
  59. A. Singh, G. Li, Y. Ram, and S.S. Pang, “Microbuckling of A Fiber Embedded in A Polymer Matrix,” presented at 10th International Conference on Composite Engineering (ICCE/10), New Orleans, July 21-26, 2003.
  60. G. Li and S.S. Pang, “Impact and Post-Impact Properties of GFRP Laminates at Low Temperatures,” Science, Engineering, and Technology Seminars (SETS’2001), AACP, Houston, USA, May 25-27, 2001.
  61. G. Li, S.S. Pang, Y. Zhao, and S. Ibekwe, “Post-Impact Buckling Evaluation of Fiber Reinforced Composite Laminate,” 5th International Conference on Composite Engineering (ICCE/5), Las Vegas, USA, July, 1998.

Proceedings/Presentations in China

  1. Z. Jiang and G. Li. Cement Based Semi-Rigid Surface Course Material: Laboratory Evaluation. 2nd International Conference on Road and Airport Pavement Technology (ICPT/95), Singapore, September, 1995.
  2. G. Li and Z. Jiang. Fractals in Gradation Aggregates. 2nd International Conference on Road and Airport Pavement Technology (ICPT/95), Singapore, September, 1995.
  3. G. Yang, G. Li, and W. Li. Rheological Characteristics of Asphalt Concrete. First National Conference on Modified Asphalt, China Highway Society, Chongqing, China, October, 1992 (in Chinese).
  4. G. Li, B. Sun, and W. Li. Study on Polymer Modified Asphalt. First National Conference on Modified Asphalt, China Highway Society, Chongqing, China, October, 1992 (in Chinese).
  5. G. Li. General Evaluation for Hightype Highway Network Using Fuzzy Method. 18th Annual Conference, North China Highway Society, Baoding, China, September, October, 1991 (in Chinese).
  6. G. Li and B. Sun. Stress Analysis of Viscoelastic Body Using LaPlace Transform Approach. National Conference on Concrete Pavement Design, Shanghai, China, June, 1989 (in Chinese).

Invited Talks

  1. “Bio-inspired Healing-on-Demand Polymer Composites,” Invited presentation in the Department of Mechanical Engineering, New York University, New York, March 25, 2019.
  2. “NSF I-corps Workshop at Louisiana State University,” Panel member, Office of Innovation & Technology Commercialization, Louisiana State University, October 8, 2018, (150 minutes).
  3. “Bio-inspired Healing-on-Demand Polymer Composites,” Invited presentation in the LSU CIMM/SMART REU programs, Louisiana State University, July 12, 2018.
  4. “Bio-inspired Healing-on-Demand Polymer Composites,” Invited presentation in the Department of Mechanical Engineering, Penn State University, Harrisburg, March 15, 2018.
  5. “Bio-inspired Healing-on-Demand Polymer Composites,” Invited presentation in the Toxicology Ph.D. Program, Southern University, March 9, 2018.
  6. “Self-healing polymer composite: engineering aspect,” presented at CHEM 7780, October 16, 2017 (50 minutes).
  7. “Polymeric Artificial Muscles,” presented at Westdale Middle School (fifteen 8th graders), September 5, 2017 (40 minutes).
  8. “NSF I-corps Workshop at Louisiana State University,” Panel member, Office of Innovation & Technology Commercialization, Louisiana State University, March 2, 2017 (150 minutes).
  9. “Damage Healing of Polymer Composite Structures under Service Conditions,” presented at Annual LaSPACE meeting, Ruston, Louisiana, November 4-5, 2016 (40 minutes).
  10. “Constitutive modeling of shape memory polymer,” Macroseminar Fall 2016, Department of Chemistry, September 9, 2016 (50 minutes).
  11. “Accelerated Development of Large-Scale Structures (CADLSS),” Panel member, Louisiana Center for Manufacturing Sciences, September 15-16, 2015, New Orleans (2 days).
  12. “Bio-inspired Self-healing Composite,” Presented at summer REU program, Southern University, Baton Rouge, Louisiana, June 16, (2015) (1 hour).
  13. “Bio-Inspired Self-healing of Hybrid Composite Structure,” Presented at summer REU program, Southern University, Baton Rouge, Louisiana, July 8, (2014) (1 hour).
  14. “Micromechanics and mechanics of laminated composite,” Invited lecture at Southeast University, June 1-June 10, 2014 (10 hours).
  15. “Bio-inspired Shape Memory Polymer Fiber Reinforced Thermosetting Polymer Composite for Self-healing of Structural-length Scale Damage,” Air Force Office of Scientific Research, The 2013 Annual Grantees’/Contractors’ Meeting, Mechanics of Multifunctional Materials & Microsystems, Washington DC, December 16-19, 2013, (25 minutes).
  16. “Shape memory polymer based self-healing syntactic foam,” Keynote speaker at 2013 Particle Conference, Dayton, Ohio, August 3-6, 2013. (30 minutes).
  17. “A Bio-mimetic Self-healing Composite” Presented at summer REU program, Southern University, Baton Rouge, Louisiana, July 16, (2013) (1 hour).
  18. Thermomechanical Behavior of Shape Memory Polymer Based Composite: Testing and Constitutive Modeling. presented at LASIGMA and Summer Bridge Institute (SBI) seminar in the Department of Physics (Room 257 William James Hall) at Southern University, June 26, 2012 (1 hour).
  19. Introduction to the Department of Mechanical Engineering at Louisiana State University and Its Graduate Education Program. presented to Faculty in the Department of Mechanics at Hebei University of Technology, June 14, 2012 (1 hour).
  20. Graduate Education in the Department of Mechanical Engineering at Louisiana State University. presented at Graduate Education Seminar, Southeast University, May 24, 2012 (30 minutes).
  21. Bio-inspired Self-healing of Structural-length Scale Damage. presented at Seminar of Exploring Opportunities in Material Science and Engineering in Louisiana, organized by LSU/OSI, April 27, 2012 (30 minutes).
  22. Bio-inspired Self-healing Composites. presented at Graduate Seminar in the College of Engineering at Southern University, March 12, 2012 (30minutes).
  23. Laminated Plate Theory. presented at Southeast University (May 28, 2010) (4 hours).
  24. Repair, Rehabilitation, Reinforcement, and Reconstruction of Damaged Concrete Structures Using FRP Composites. presented at Chongqing Jiaotong University (June 1, 2010) and Hebei University of Technology (June 4, 2010) (1 hour).
  25. National Evaluation of the National Science Foundation’s Alliances for Graduate Education and the Professoriate (AGEP) Program. served as a Faculty Panel Member which was conducted by The American Institute for Research (AIR), (January 19, 2010) (1hour).
  26. Shape-Memory Polymers and Their Mechanical Properties. Presented at a graduate class “CHEM4011: Macromolecular” at LSU, November 24, 2009 (1.5hour).
  27. Self-healing of Structural-length Scale Damage using Shape Memory Polymer-based Composites. Presented at a graduate class “CHEM 7901: Macromolecular Seminar” at LSU, November 20, 2009 (50 minutes).
  28. What to Expect in College: A Professor’s Perspective. Panel member for incoming freshmen in the LA-STEM and HHMI programs, organized by the Office of Strategic Initiatives at LSU (07/15/2009) (3 hours).
  29. Integration of Education and Mentoring Programs at Louisiana State University. Presented at I-Cube Workshop by NSF sponsored QUALITY EDUCATION FOR MINORITIES (QEM) Network, Houston, Texas, March 28, 2009.
  30. Micromechanics Based Construction Materials Design. Presented at Chongqing Jiaotong University (05/25/2009) and Southeast University (05/27/2009), (1 hour).
  31. Shape Memory Polymer. Presented at a graduate class CHEM4011Macromolecular at LSU, March 19, 2009.
  32. Classical Lamination Theory. Presented at Entergy River Bend Nuclear Station for a training workshop, St. Francisville, LA, November 18, 2008.
  33. Repair, Rehabilitation, Reinforcement, and Reconstruction of Civil Infrastructure Using FRP Composites. Presented at Entergy River Bend Nuclear Station for a training workshop, St. Francisville, LA, November 18, 2008.
  34. Testing And Modeling of Impact/blast Response of Composite Armors. CCT Colloquium at LSU, May 18, 2007.
  35. Low Velocity Impact of Composite Structures. Invited Talk at the University of Tennessee, November 16, 2006.
  36. Low Velocity Impact Degradation, Characterization, and Rehabilitation of Laminated Composites. Distinguished Speaker at the 14th International Conference on Composite/Nanocomposite Engineering (ICCE/14), July 2-8, 2006, Boulder, Colorado.
  37. Impact Mitigation of Composite Sandwich Structures Using Hybrid Core. Presented at the HBCU/MI Workshop on Impact and Blast Mitigation Sponsored by the Army Research Office (ARO), August 24-25, 2005, Williamsburg, VA.
  38. Low Velocity Impact Degradation and Rehabilitation of Laminated Composite Materials. Hosted by LSU Minority Engineering Program and NSF PETROCHEM, LAMP, AET (CSEMS) Program, October 22, 2002 at LSU Union Royal Ballroom.
  39. Composite Materials and Structures Research at LSU/SU. Hosted by SU College of Engineering, Seminar for Graduate Students, October 2, 2003.
  40. Infrastructure Composite Research at LSU. Hosted by Mechanical Engineering Department at the University of New Orleans, October 20, 2003.